Boss Mustang stocker

Bill Diehl · 02-19-2017, 09:40 AM

With all that being said, I am still kicking around block fill or no block fill. The sonic test is very good on this particular casting and I like the idea of water around the liners for cooling. If the class allowed a motor plate it would get a 1/2 to 3/4 fill but since it doesn't....I am still weighing up the pros and cons.

This engine is/or will be an improvement from the old one...but I am still waiting for the track boss blocks to be available for the next upgrade, some of the mods I have done and explained in the thread will not be required with the track boss block as they are incorporated in the new castings

02-19-2017, 09:40 AM	#29
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker With all that being said, I am still kicking around block fill or no block fill. The sonic test is very good on this particular casting and I like the idea of water around the liners for cooling. If the class allowed a motor plate it would get a 1/2 to 3/4 fill but since it doesn't....I am still weighing up the pros and cons. This engine is/or will be an improvement from the old one...but I am still waiting for the track boss blocks to be available for the next upgrade, some of the mods I have done and explained in the thread will not be required with the track boss block as they are incorporated in the new castings __________________ __________________ Bill Diehl B200 C/D STK Last edited by Bill Diehl; 02-19-2017 at 09:46 AM.