Boss Mustang stocker

Bill Diehl · 11-12-2015, 11:17 AM

I need to get some clarifications on the roll cage, I got an approval for a 25.5C spec floor construction ect, but I would like to "attach" the rest of the cage to the a pillar, b pillar, door post ect....but then it makes a hard time with the plastic trim going back in. (that the rules state you got to have)

Just putting tubing inside a shell is one thing but there is still a lot of heavy unibody structure surrounding it going for the ride, just seems better to be all "one piece" since this is not a car with a plastic or carbon body around it

the firewall, front drops to the front frame structure that is new for 2016 I completely agree with

11-12-2015, 11:17 AM	#23
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker I need to get some clarifications on the roll cage, I got an approval for a 25.5C spec floor construction ect, but I would like to "attach" the rest of the cage to the a pillar, b pillar, door post ect....but then it makes a hard time with the plastic trim going back in. (that the rules state you got to have) Just putting tubing inside a shell is one thing but there is still a lot of heavy unibody structure surrounding it going for the ride, just seems better to be all "one piece" since this is not a car with a plastic or carbon body around it the firewall, front drops to the front frame structure that is new for 2016 I completely agree with __________________ __________________ Bill Diehl B200 C/D STK