Wanted; Chevy Carter 4 barrel

Rory McNeil · 08-25-2011, 01:49 AM

A buddy is looking for a Carter 4 barrel carb for a 300HP 327 Super Stock project. The numbers he provided me with are #3460 or 3461. Supposedly these are the only carb #`s used on a 64 Chevelle with this engine combination. If anybody knows otherwise, please let us know. A good rebuildable core is prefered, but a race prepped unit may be considered. Thanks.

FED 387 · 08-25-2011, 11:12 AM

will look in the loft might just have one---will need to be rebuilt for racing but for a street car you could probably use it as is---Comp

tj310 · 08-26-2011, 11:29 AM

http://ontario.kijiji.ca/c-cars-vehi...AdIdZ308919263 It's funny that the stuff for sale always came off of a Corvette.......Thanx Trevor

Terry Cain · 08-26-2011, 04:35 PM

I'm pretty sure I have one. Please email me direct.
Also pretty sure he can use a 3459S or 3462S
Numbers don't mean anything to NHRA just as long as size is correct.
1562x1686/1250x1562
has to be a Carter AFB but, he might even check, he might be able to use a NEW carter AFB if size is correct.

Terry Bride · 08-29-2011, 11:22 AM

Hey Rory,

I have a 3721s which is a 1965 300 horse 327 carb. It has the correct dimensions as the 64 carb. Call me at the shop 604-270-6588 if interested.

Terry

Larry Fulton · 08-29-2011, 03:20 PM

Carter AFB - 300HP/327

1 - CORVETTE - 3721SB - dated K4 - REAL CLEAN CORE / I.A.C. Model / no choke housing... can e-mail pics if you PM your address.

Phillip marvetz · 08-30-2011, 01:58 AM

I might have one Rory, It doesn't have any numbers on it though. The fuel inlet is on the drivers side rear, Only one I've ever seen like it. Anyone know what it's off of?

Larry Fulton · 08-30-2011, 10:05 AM

(example 3721S)

the application numbers for a GM factory o.e.m. AFB should be "Stamped" into the passenger front corner of the base plate.... a blank base is probably an aftermarket carter afb (which may / or may not be accepted for the horsepower claimed).

Rory McNeil · 08-31-2011, 01:01 PM

Thanks guys, he was able to pick up a couple of carbs , thanks to this forum.

08-25-2011, 01:49 AM	#1
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,307 Likes: 312 Liked 1,083 Times in 298 Posts	Wanted; Chevy Carter 4 barrel A buddy is looking for a Carter 4 barrel carb for a 300HP 327 Super Stock project. The numbers he provided me with are #3460 or 3461. Supposedly these are the only carb #`s used on a 64 Chevelle with this engine combination. If anybody knows otherwise, please let us know. A good rebuildable core is prefered, but a race prepped unit may be considered. Thanks. __________________ NHRA 6390 STK M/S 85 Mustang

08-25-2011, 11:12 AM	#2
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,409 Likes: 505 Liked 329 Times in 177 Posts	Re: Wanted; Chevy Carter 4 barrel will look in the loft might just have one---will need to be rebuilt for racing but for a street car you could probably use it as is---Comp

08-26-2011, 04:35 PM	#4
Terry Cain Senior Member Join Date: Feb 2008 Location: Georgetown, Indiana (close to Louisville, KY) Posts: 774 Likes: 530 Liked 230 Times in 106 Posts	Re: Wanted; Chevy Carter 4 barrel I'm pretty sure I have one. Please email me direct. Also pretty sure he can use a 3459S or 3462S Numbers don't mean anything to NHRA just as long as size is correct. 1562x1686/1250x1562 has to be a Carter AFB but, he might even check, he might be able to use a NEW carter AFB if size is correct. __________________ Terry Cain ???? STK tcain19689585@gmail.com Last edited by Terry Cain; 08-26-2011 at 04:42 PM.

08-29-2011, 11:22 AM	#5
Terry Bride Junior Member Join Date: Jun 2011 Posts: 23 Likes: 8 Liked 0 Times in 0 Posts	Re: Wanted; Chevy Carter 4 barrel Hey Rory, I have a 3721s which is a 1965 300 horse 327 carb. It has the correct dimensions as the 64 carb. Call me at the shop 604-270-6588 if interested. Terry

08-29-2011, 03:20 PM	#6
Larry Fulton Member Join Date: Oct 2003 Posts: 271 Likes: 53 Liked 0 Times in 0 Posts	Re: Wanted; Chevy Carter 4 barrel Carter AFB - 300HP/327 1 - CORVETTE - 3721SB - dated K4 - REAL CLEAN CORE / I.A.C. Model / no choke housing... can e-mail pics if you PM your address. __________________ Larry Fulton

08-26-2011, 11:29 AM	#3
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: Wanted; Chevy Carter 4 barrel http://ontario.kijiji.ca/c-cars-vehi...AdIdZ308919263 It's funny that the stuff for sale always came off of a Corvette.......Thanx Trevor Last edited by tj310; 08-29-2011 at 04:43 PM.

08-30-2011, 01:58 AM	#7
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Wanted; Chevy Carter 4 barrel I might have one Rory, It doesn't have any numbers on it though. The fuel inlet is on the drivers side rear, Only one I've ever seen like it. Anyone know what it's off of? __________________ 2009 V/SA Record Holder

08-30-2011, 10:05 AM	#8
Larry Fulton Member Join Date: Oct 2003 Posts: 271 Likes: 53 Liked 0 Times in 0 Posts	Re: Wanted; Chevy Carter 4 barrel (example 3721S) the application numbers for a GM factory o.e.m. AFB should be "Stamped" into the passenger front corner of the base plate.... a blank base is probably an aftermarket carter afb (which may / or may not be accepted for the horsepower claimed). __________________ Larry Fulton

08-31-2011, 01:01 PM	#9
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,307 Likes: 312 Liked 1,083 Times in 298 Posts	Re: Wanted; Chevy Carter 4 barrel Thanks guys, he was able to pick up a couple of carbs , thanks to this forum. __________________ NHRA 6390 STK M/S 85 Mustang