CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Race Parts: Classifieds (https://classracer.com/classforum/forumdisplay.php?f=12)
-   -   Wanted; Chevy Carter 4 barrel (https://classracer.com/classforum/showthread.php?t=35571)

Rory McNeil 08-25-2011 01:49 AM

Wanted; Chevy Carter 4 barrel
 
A buddy is looking for a Carter 4 barrel carb for a 300HP 327 Super Stock project. The numbers he provided me with are #3460 or 3461. Supposedly these are the only carb #`s used on a 64 Chevelle with this engine combination. If anybody knows otherwise, please let us know. A good rebuildable core is prefered, but a race prepped unit may be considered. Thanks.

FED 387 08-25-2011 11:12 AM

Re: Wanted; Chevy Carter 4 barrel
 
will look in the loft might just have one---will need to be rebuilt for racing but for a street car you could probably use it as is---Comp

tj310 08-26-2011 11:29 AM

Re: Wanted; Chevy Carter 4 barrel
 
http://ontario.kijiji.ca/c-cars-vehi...AdIdZ308919263 It's funny that the stuff for sale always came off of a Corvette.......Thanx Trevor

Terry Cain 08-26-2011 04:35 PM

Re: Wanted; Chevy Carter 4 barrel
 
I'm pretty sure I have one. Please email me direct.
Also pretty sure he can use a 3459S or 3462S
Numbers don't mean anything to NHRA just as long as size is correct.
1562x1686/1250x1562
has to be a Carter AFB but, he might even check, he might be able to use a NEW carter AFB if size is correct.

Terry Bride 08-29-2011 11:22 AM

Re: Wanted; Chevy Carter 4 barrel
 
Hey Rory,

I have a 3721s which is a 1965 300 horse 327 carb. It has the correct dimensions as the 64 carb. Call me at the shop 604-270-6588 if interested.

Terry

Larry Fulton 08-29-2011 03:20 PM

Re: Wanted; Chevy Carter 4 barrel
 
Carter AFB - 300HP/327

1 - CORVETTE - 3721SB - dated K4 - REAL CLEAN CORE / I.A.C. Model / no choke housing... can e-mail pics if you PM your address.

Phillip marvetz 08-30-2011 01:58 AM

Re: Wanted; Chevy Carter 4 barrel
 
I might have one Rory, It doesn't have any numbers on it though. The fuel inlet is on the drivers side rear, Only one I've ever seen like it. Anyone know what it's off of?

Larry Fulton 08-30-2011 10:05 AM

Re: Wanted; Chevy Carter 4 barrel
 
(example 3721S)

the application numbers for a GM factory o.e.m. AFB should be "Stamped" into the passenger front corner of the base plate.... a blank base is probably an aftermarket carter afb (which may / or may not be accepted for the horsepower claimed).

Rory McNeil 08-31-2011 01:01 PM

Re: Wanted; Chevy Carter 4 barrel
 
Thanks guys, he was able to pick up a couple of carbs , thanks to this forum.


All times are GMT -4. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.