Turbo 350 overflow canister

Coach · 07-12-2010, 07:31 PM

Need a little help on finding a turbo 350 overflow canister.

I am tired of always cleaning the buttom of my race car after every race!

Coach

Jim Cimarolli · 07-12-2010, 07:57 PM

You have a PM.

Ed Wright · 07-12-2010, 08:16 PM

I just tig welded an aluminum -6 male fitting to the Moroso vacuum pump catch can I have my valve cover hooked to for a crank case breather. Used a -6 pushlock hose end and clear tubing from Ace Hardware clamped to the plastic vent with the cap removed. Strange you are getting a mess. My clear hose hardly ever has anything in it.
My trans brake does leak, however. :-(

Tom Goldman · 07-12-2010, 09:33 PM

JAZ jr dragster 1 pint breather tanks work nicely for this. ....Tom

Jim Kaekel · 07-13-2010, 02:24 PM

x2 on the one pint JAZ canisters. Just run a hose from the vent tube to the overflow, which can be mounted to the firewall.

Bob Mulry · 07-13-2010, 02:41 PM

Hi Guys,

I just did a TH-350 for a friends GT car and installed a catch can that was made by DEWZEN and it was a very nice piece and I would recommend that you take a look at their catch cans. They also make catch cans for other applications.

www.dewzen.com

Bob

Hugh Meeks · 07-17-2010, 09:02 AM

Stinnett makes a nice one as well. It has a bracket that allows to bolt the can to the tailhousing. Out of the way but easy to reach to drain.

Hugh

07-12-2010, 07:31 PM	#1
Coach Junior Member Join Date: Jun 2008 Location: Houston, Texas Posts: 68 Likes: 213 Liked 2 Times in 2 Posts	Turbo 350 overflow canister Need a little help on finding a turbo 350 overflow canister. I am tired of always cleaning the buttom of my race car after every race! Coach

07-12-2010, 07:57 PM	#2
Jim Cimarolli Senior Member Join Date: Mar 2002 Location: Sulphur Springs Texas Posts: 743 Likes: 146 Liked 166 Times in 46 Posts	Re: Turbo 350 overflow canister You have a PM.

07-12-2010, 08:16 PM	#3
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Turbo 350 overflow canister I just tig welded an aluminum -6 male fitting to the Moroso vacuum pump catch can I have my valve cover hooked to for a crank case breather. Used a -6 pushlock hose end and clear tubing from Ace Hardware clamped to the plastic vent with the cap removed. Strange you are getting a mess. My clear hose hardly ever has anything in it. My trans brake does leak, however. :-( __________________ Ed Wright 4156 SS/JA

07-12-2010, 09:33 PM	#4
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,474 Likes: 885 Liked 859 Times in 234 Posts	Re: Turbo 350 overflow canister JAZ jr dragster 1 pint breather tanks work nicely for this. ....Tom __________________ Tom Goldman 1500 SG , 1506 STK

07-13-2010, 02:24 PM	#5
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,226 Likes: 133 Liked 529 Times in 107 Posts	Re: Turbo 350 overflow canister x2 on the one pint JAZ canisters. Just run a hose from the vent tube to the overflow, which can be mounted to the firewall. __________________ Jim Kaekel 3836 STK

07-13-2010, 02:41 PM	#6
Bob Mulry VIP Member Join Date: Apr 2002 Location: Coarsegold, CA Posts: 1,016 Likes: 57 Liked 320 Times in 102 Posts	Re: Turbo 350 overflow canister Hi Guys, I just did a TH-350 for a friends GT car and installed a catch can that was made by DEWZEN and it was a very nice piece and I would recommend that you take a look at their catch cans. They also make catch cans for other applications. www.dewzen.com Bob __________________ Bob Mulry 7516 STK A & M Motorsports

07-17-2010, 09:02 AM	#7
Hugh Meeks Junior Member Join Date: Sep 2002 Location: Montgomery, Al Posts: 61 Likes: 0 Liked 0 Times in 0 Posts	Re: Turbo 350 overflow canister Stinnett makes a nice one as well. It has a bracket that allows to bolt the can to the tailhousing. Out of the way but easy to reach to drain. Hugh