Turbo 350 overflow canister
 

Need a little help on finding a turbo 350 overflow canister.

I am tired of always cleaning the buttom of my race car after every race!

Coach

Re: Turbo 350 overflow canister
 

You have a PM.

Re: Turbo 350 overflow canister
 

I just tig welded an aluminum -6 male fitting to the Moroso vacuum pump catch can I have my valve cover hooked to for a crank case breather. Used a -6 pushlock hose end and clear tubing from Ace Hardware clamped to the plastic vent with the cap removed. Strange you are getting a mess. My clear hose hardly ever has anything in it.
My trans brake does leak, however. :-(

Re: Turbo 350 overflow canister
 

JAZ jr dragster 1 pint breather tanks work nicely for this. ....Tom

Re: Turbo 350 overflow canister
 

x2 on the one pint JAZ canisters. Just run a hose from the vent tube to the overflow, which can be mounted to the firewall.

Re: Turbo 350 overflow canister
 

Hi Guys,

I just did a TH-350 for a friends GT car and installed a catch can that was made by DEWZEN and it was a very nice piece and I would recommend that you take a look at their catch cans. They also make catch cans for other applications.

www.dewzen.com


Bob

Re: Turbo 350 overflow canister
 

Stinnett makes a nice one as well. It has a bracket that allows to bolt the can to the tailhousing. Out of the way but easy to reach to drain.

Hugh