|
|
05-21-2025, 10:23 PM
|
#1 |
|
Junior Member
Join Date: Nov 2005
Location: 15022
Posts: 15
Likes: 36
Liked 1 Time in 1 Post
|
Steering Shaft
Does anyone make a steering shaft for a Vega steering box to a stock 1990 Camaro column using block and pin U joints and moly tubing. Ed Quay made these at one time but no more.
|
|
|
|
05-22-2025, 05:59 PM
|
#3 |
|
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 3,028
Likes: 708
Liked 1,521 Times in 567 Posts
|
Re: Steering Shaft
The Vega steering box is not recommended for cars that exceed 3000lbs in weight and that also wheel stand.
Borgeson sells a better steering box and you can use your current steering shaft. https://www.borgeson.com/78-88-Malibu-82-92-Camaro.html They also have a replacement steering shaft. https://www.borgeson.com/G-Body-F-Bo...ing-Shaft.html Last edited by SSDiv6; 05-22-2025 at 06:01 PM. |
|
|
|
|
05-23-2025, 01:41 PM
|
#4 |
|
VIP Member
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,666
Likes: 3,332
Liked 1,788 Times in 420 Posts
|
Re: Steering Shaft
I have a couple of Manual s10 steering box?s for sale. Bolts right in
__________________
james perrone 1290 STK |
|
|
|
| Liked |
|
05-24-2025, 10:59 AM
|
#5 |
|
Member
Join Date: May 2014
Location: E TN
Posts: 466
Likes: 16
Liked 131 Times in 75 Posts
|
Re: Steering Shaft
The S10 box will bolt right in and use the factory pitman arm, I ran one on my 85 F body for decades. you can buy the joints and make a shaft. I ran the factory shaft on mine.
Last edited by Eman; 05-24-2025 at 11:01 AM. |
|
|
|
| Liked |
 |
|
|
Linear Mode
