CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Steering Shaft (https://classracer.com/classforum/showthread.php?t=89610)

1214 05-21-2025 10:23 PM

Steering Shaft
 
Does anyone make a steering shaft for a Vega steering box to a stock 1990 Camaro column using block and pin U joints and moly tubing. Ed Quay made these at one time but no more.

James Perrone 05-22-2025 04:30 PM

Re: Steering Shaft
 
Borgson. Or try speedway

SSDiv6 05-22-2025 05:59 PM

Re: Steering Shaft
 
The Vega steering box is not recommended for cars that exceed 3000lbs in weight and that also wheel stand.
Borgeson sells a better steering box and you can use your current steering shaft.

https://www.borgeson.com/78-88-Malibu-82-92-Camaro.html

They also have a replacement steering shaft.

https://www.borgeson.com/G-Body-F-Bo...ing-Shaft.html

James Perrone 05-23-2025 01:41 PM

Re: Steering Shaft
 
I have a couple of Manual s10 steering box?s for sale. Bolts right in

Eman 05-24-2025 10:59 AM

Re: Steering Shaft
 
The S10 box will bolt right in and use the factory pitman arm, I ran one on my 85 F body for decades. you can buy the joints and make a shaft. I ran the factory shaft on mine.


All times are GMT -4. The time now is 06:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.