Ss GT/TA-D

John Winslow Jr · 04-03-2024, 09:29 PM

Not sure I have seen a ford ranger in the GT class, that would be cool, hope you can make it happen. John

bpete · 04-04-2024, 10:26 AM

I need to look into it a bit further.
I have a donor chassis.
Some of the aluminum replacement heads look like they are not available for some combinations.

Acceptable cross-member modifications are also of a concern. IE what can be trimmed and or replaced within the class guidelines..

Brad

Hacksaw · 04-05-2024, 09:20 AM

You need to maintain the upper and lower control arms, otherwise cut out and trim as much as you need for clearance. However you will need to add reinforcement, as a tube/plate under the oil pan.

04-03-2024, 09:29 PM	#1
John Winslow Jr Member Join Date: Sep 2006 Location: Prunedale Ca Posts: 197 Likes: 538 Liked 412 Times in 87 Posts	Re: Ss GT/TA-D Not sure I have seen a ford ranger in the GT class, that would be cool, hope you can make it happen. John

04-04-2024, 10:26 AM	#2
bpete Junior Member Join Date: Mar 2015 Posts: 13 Likes: 0 Liked 19 Times in 4 Posts	Re: Ss GT/TA-D I need to look into it a bit further. I have a donor chassis. Some of the aluminum replacement heads look like they are not available for some combinations. Acceptable cross-member modifications are also of a concern. IE what can be trimmed and or replaced within the class guidelines.. Brad

04-05-2024, 09:20 AM	#3
Hacksaw Senior Member Join Date: Sep 2016 Posts: 884 Likes: 207 Liked 310 Times in 174 Posts	Re: Ss GT/TA-D You need to maintain the upper and lower control arms, otherwise cut out and trim as much as you need for clearance. However you will need to add reinforcement, as a tube/plate under the oil pan.