Ss gt/ta-d
 

If I understand the Class Racer Info site correctly...

A 91-93 Ranger can run in SS GT/TA through D depending on engine combo.

Is this is a possibility?


Brad

Re: Ss GT/TA-D
 

You are correct. They did away with the 250lb + or - a few years back in GT

Re: Ss GT/TA-D
 

Not sure I have seen a ford ranger in the GT class, that would be cool, hope you can make it happen. John

Re: Ss GT/TA-D
 

I need to look into it a bit further.
I have a donor chassis.
Some of the aluminum replacement heads look like they are not available for some combinations.

Acceptable cross-member modifications are also of a concern. IE what can be trimmed and or replaced within the class guidelines..

Brad

Re: Ss GT/TA-D
 

You need to maintain the upper and lower control arms, otherwise cut out and trim as much as you need for clearance. However you will need to add reinforcement, as a tube/plate under the oil pan.