HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Classifieds > Race Cars: Classifieds
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 08-16-2023, 02:01 PM   #10
SBillinson
Junior Member
 
Join Date: Jan 2004
Posts: 94
Likes: 42
Liked 183 Times in 48 Posts
Default Re: wanted - Ford Cylinder Heads

The -AA come with 1.84/1.54 valves.

The throats on a set I have measured 1.64"/1.27", which would give you a 92% intake throat and a 87.5% exhaust throat when using 1.780"/1.450' valves.

In other words, you'd need to change the intake seats because the throat's too big. A 92% throat will work, but 88%-90% is where you want to be for a stocker.

You'd also have to sink the exhaust valve, but there's enough material on the seats to keep the throat at 88-89%. Depending on how much you have to sink them, you may be better off replacing all seats in the heads.
__________________
SS/BS 1921
SBillinson is offline   Reply With Quote
Liked
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.