Radial tires

[Troy Henderson]

Originally Posted by James Perrone

Are you running a radials in the video?
Car leaves perfect

Yes sir

[James Perrone]

Troy you must be the only guy running them
It’s has to be faster.
It’s been said a radial tire could be 1 tenths faster. Than a bias ply
Good job

[427FE]

Originally Posted by Troy Henderson

Radials need to be dead hooked with even then increasing pressure right off the hit to work consistently. Basically just like an automatic car leaves. If your car pounds the bias tires hard to make it leave it may not be able to hook radials. Good shocks, sorted suspension and data logging go a long ways.

https://photos.app.goo.gl/mNJHBABXRNpW43cYA

Whos rear shocks do you use? Car leaves PERFECT

[4284spd]

Originally Posted by James Perrone

Troy you must be the only guy running them
It’s has to be faster.
It’s been said a radial tire could be 1 tenths faster. Than a bias ply
Good job

Their is quite a few stick cars running them. Markus Svennson was testing them back in 2019.
94883672_116236470064783_6239002913033682944_o_116 236463398117 by Bob Smith, on Flickr

[Troy Henderson]

Originally Posted by 427FE

Whos rear shocks do you use? Car leaves PERFECT

Fast shocks

[Doug Domm]

What rpm difference is there at the top end between bias and radial with the same rollout for each?

[Glenn Briglio]

Originally Posted by Doug Domm

What rpm difference is there at the top end between bias and radial with the same rollout for each?

150 to 200