Eating Crow - Tear Down at Indy

[GATOR]

Originally Posted by Wyatt Wagner

They checked it with some homemade tool and a 10 cent tape measure. They measured 3 times and got a different measurement each time. Ask to take all four wheels off and measure that was to get and exact measurement. The response I got was “your still gonna get the same result. See you later”

First thing I thought of. Dummy wheel inserts with a cheap tape measure!! I had an issue years ago but I set my wheelbase with plumb bobs and a level concrete floor. I ended up lengthening my 4 link bars a 1/4" more afterward so wheelbase would comply with NHRA apparatus. I would've pulled a wheel. And last time in the barn I looked at NHRA's burette. Medical grade??!! LMAO, don't ask. Hopefully changed by now but sounds like if they're still using that antiquated wheelbase apparatus!!??!!!

[Frank Castros]

Wyatt,
I'm sorry for your experience. Could you not have issued a appeal to Lonnie and insisted on removing all four wheels? After all its Indy.
Frank

[Paradigm Shift]

Out of curiosity, what was the wheelbase measurement when you measured it yourself prior to the event?


What was the actual dimension when you measured it post event?

[John Kissel]

Originally Posted by GATOR

First thing I thought of. Dummy wheel inserts with a cheap tape measure!! I had an issue years ago but I set my wheelbase with plumb bobs and a level concrete floor. I ended up lengthening my 4 link bars a 1/4" more afterward so wheelbase would comply with NHRA apparatus. I would've pulled a wheel. And last time in the barn I looked at NHRA's burette. Medical grade??!! LMAO, don't ask. Hopefully changed by now but sounds like if they're still using that antiquated wheelbase apparatus!!??!!!

Are you referring to that burette stand thing that looks like a piece of old t.v.antenna. Good luck for the future, John Kissel

[Kevin Panzino]

Originally Posted by John Kissel

Are you referring to that burette stand thing that looks like a piece of old t.v.antenna. Good luck for the future, John Kissel

Im not sure what the hell you are talking about. It was a genuine Fisher Scientific burette. What exactly would you like them to use?

What do you use to CC your heads ?

[Jason]

Asking a question. Why did only one car fail while all the others in teardown passed the wheelbase check? A measurement of 106 3/4 on a 108 W.B. is 1 1/4 short. The rulebook allows +/- 3/4 inch. Look closely at the Video. It looks like the rear wheel is moved forward in the wheel well opening.

[Larry Hill]

Just questing but if WB is 108” it can be 107 1/4” to 108 3/4”. Everything else is wrong.