valves

SSDiv6 · 04-14-2021, 11:49 AM

Valve geometry issue.

Jim Hanig · 04-15-2021, 11:27 AM

Quote:

Originally Posted by SSDiv6

Valve geometry issue.

and what would that be? i have the rocker in the correct location on the valve, and as i said these heads never had a problem until i put new valves and the comp rocker on them..

SSDiv6 · 04-15-2021, 12:23 PM

Quote:

Originally Posted by Jim Hanig

and what would that be? i have the rocker in the correct location on the valve, and as i said these heads never had a problem until i put new valves and the comp rocker on them..

Jim,

Have you put some felt pen ink or die on the valve tip and done a full sweep to check the contact on the valve tip? A couple of guys I know have experienced issues with the Comp rockers because they are not the ratio they purchased.

Also, make sure sure the roller tip rotates free. Too many times I have seen others wash brand new roller rockers, removing the lubricant from the roller making them seize. A seized roller tip can generate a side load on the valve stem due to limited contact on the tip.

04-14-2021, 11:49 AM	#1
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,044 Likes: 712 Liked 1,582 Times in 582 Posts	Re: valves Valve geometry issue.