Tuesday H.P.

Garry Dearn · 03-10-2021, 01:31 AM

Here it is gang-22 H.P for 2009-2013 Dodge Challengers. From 300-322 H.P.-Stock Automatic Only.

Paul Wong · 03-10-2021, 01:51 AM

Without a tear down as well.

Pete Lanciers · 03-10-2021, 02:02 AM

Quote:

Originally Posted by Paul Wong

Without a tear down as well.

Ok Paul I’ll bite, why not... did the culprit bolt before a request could be made? Was he there for eliminations or just took the trophy and ran?

Jim Bailey · 03-10-2021, 08:59 AM

The engine was still sealed from a teardown last fall ..... Maybe someone can highlight us as to why he was removed from the ladder...?

Jim Bailey · 03-10-2021, 09:33 AM

Additionally, FYI , he was torn down (again) at Gainesville.

Jim Bailey · 03-10-2021, 09:48 AM

Also, he wasn't removed from the ladder, he was a no show. ( probably because his engine was completely apart ...)

GTS340 · 03-10-2021, 11:08 AM

I take it you were there Jim watching these tear downs. Hard to believe a stock bore production engine can seal up that well to make near 600hp. If not more! He goes .325 green and catches a second under competitor by the 660' is amazing all in its own. He has plenty left after coasting from the 1100' mark for all the F,G and still H cars now even at 322hp. Might need a better reaction though. That's what happens when you show that kinda performance. You bring extra gaskets.

Paul Haszlauer

jamie2370 · 03-10-2021, 11:42 AM

Quote:

Originally Posted by GTS340

I take it you were there Jim watching these tear downs. Hard to believe a stock bore production engine can seal up that well to make near 600hp. If not more! He goes .325 green and catches a second under competitor by the 660' is amazing all in its own. He has plenty left after coasting from the 1100' mark for all the F,G and still H cars now even at 322hp. Might need a better reaction though. That's what happens when you show that kinda performance. You bring extra gaskets.

Paul Haszlauer

Looks like stock bore is 3.920 and MAX bore is 4.000. Thats .080 over and Diamond makes an approved piston for it, not to mention it is a +18 cc dome piston. Seems pretty easy other than you need a couple dead bodies in the trunk to make weight lol Also he only went 60 to 80 under last year. I think the engine really likes the bigger, lighter, better ring package, pistons.....just saying

GTS340 · 03-10-2021, 12:01 PM

I have said this before. I was the one who got the piston approved which happened the last few days of Jan 2021. The only thing available before that time (The record set in Nov 2020) had to be a OEM piston. Chrysler doesn't make an oversized piston. You can buy an oversized piston from other vendors but that isn't approved. That is why I worked with Diamond and NHRA to get it excepted. It took a while. Is it stock bore, Left and right offset piston with a press on pin like stock OEM? If so it is good to go or does he claim stock piston and it isn't?

Kenney Kelley · 03-10-2021, 01:02 PM

If the car can run that fast it might be in the wrong class to start with. I think the car with the extra 22HP. only needs to add 92 Lbs. to move to G/SA or remove 69 Lbs. and move up to F/SA. This is from the 3620 Lbs. at 300 HP. that was the Min. weight at the 2021 Baby Gators for that car combination in H/SA. Kenney Kelley

03-10-2021, 01:31 AM	#1
Garry Dearn Junior Member Join Date: Nov 2016 Location: Lasalle,Quebec,Canada Posts: 12 Likes: 3 Liked 3 Times in 3 Posts	Tuesday H.P. Here it is gang-22 H.P for 2009-2013 Dodge Challengers. From 300-322 H.P.-Stock Automatic Only. Last edited by Garry Dearn; 03-10-2021 at 01:41 AM.

03-10-2021, 01:51 AM	#2
Paul Wong Member Join Date: Jan 2003 Location: Las Vegas Posts: 384 Likes: 101 Liked 419 Times in 85 Posts	Re: Tuesday H.P. Without a tear down as well.

03-10-2021, 08:59 AM	#4
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: Tuesday H.P. The engine was still sealed from a teardown last fall ..... Maybe someone can highlight us as to why he was removed from the ladder...?

03-10-2021, 09:33 AM	#5
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: Tuesday H.P. Additionally, FYI , he was torn down (again) at Gainesville.

03-10-2021, 09:48 AM	#6
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: Tuesday H.P. Also, he wasn't removed from the ladder, he was a no show. ( probably because his engine was completely apart ...)

03-10-2021, 11:08 AM	#7
GTS340 Senior Member Join Date: Feb 2017 Location: Las Vegas, Nv Posts: 868 Likes: 270 Liked 1,341 Times in 408 Posts	Re: Tuesday H.P. I take it you were there Jim watching these tear downs. Hard to believe a stock bore production engine can seal up that well to make near 600hp. If not more! He goes .325 green and catches a second under competitor by the 660' is amazing all in its own. He has plenty left after coasting from the 1100' mark for all the F,G and still H cars now even at 322hp. Might need a better reaction though. That's what happens when you show that kinda performance. You bring extra gaskets. Paul Haszlauer

03-10-2021, 12:01 PM	#9
GTS340 Senior Member Join Date: Feb 2017 Location: Las Vegas, Nv Posts: 868 Likes: 270 Liked 1,341 Times in 408 Posts	Re: Tuesday H.P. I have said this before. I was the one who got the piston approved which happened the last few days of Jan 2021. The only thing available before that time (The record set in Nov 2020) had to be a OEM piston. Chrysler doesn't make an oversized piston. You can buy an oversized piston from other vendors but that isn't approved. That is why I worked with Diamond and NHRA to get it excepted. It took a while. Is it stock bore, Left and right offset piston with a press on pin like stock OEM? If so it is good to go or does he claim stock piston and it isn't?

03-10-2021, 01:02 PM	#10
Kenney Kelley Member Join Date: Dec 2006 Location: Cocoa Florida Posts: 205 Likes: 181 Liked 72 Times in 36 Posts	Re: Tuesday H.P. If the car can run that fast it might be in the wrong class to start with. I think the car with the extra 22HP. only needs to add 92 Lbs. to move to G/SA or remove 69 Lbs. and move up to F/SA. This is from the 3620 Lbs. at 300 HP. that was the Min. weight at the 2021 Baby Gators for that car combination in H/SA. Kenney Kelley Last edited by Kenney Kelley; 03-10-2021 at 01:05 PM.