Patterson Elite 4GC carb spacer

prostockpete1 · 12-28-2020, 09:39 PM

Tim ... have you received the "trick spacer yet " ... sounds like a Mr.gasket or Trans dapt aluminum spacer thats been put in a Bridgeport mill and had the top side milled on a angle .. I made one in the late 70.s for my 283 SS er and it made quite a change in performance especially with a lot of front end lift on launch as the spacer levelled off the 4gc carb angle on top of manifold and fixed a slight stumble

12-28-2020, 09:39 PM	#3
prostockpete1 Member Join Date: Mar 2012 Posts: 255 Likes: 3 Liked 90 Times in 52 Posts	Re: Patterson Elite 4GC carb spacer Tim ... have you received the "trick spacer yet " ... sounds like a Mr.gasket or Trans dapt aluminum spacer thats been put in a Bridgeport mill and had the top side milled on a angle .. I made one in the late 70.s for my 283 SS er and it made quite a change in performance especially with a lot of front end lift on launch as the spacer levelled off the 4gc carb angle on top of manifold and fixed a slight stumble