Looking for 350 sbc forged crank

roy c · 02-24-2017, 10:11 AM

hello if anyone has a 350 forged crank standard journals preferred
would be great for a 72 C 20 project also a 8" balancer thanks roy

MAURICE BLENDHEIM · 02-24-2017, 10:39 AM

Roy…Where are you located? MB

roy c · 02-24-2017, 08:24 PM

Long Island ny

Dave Crysler · 02-25-2017, 03:03 PM

I have a GM 3.75 stroke crank, rods are 2.1, mains are 2.430,there are new bearings for both, a 6 inch rod was used in this motor, also have a 7 inch ATI balancer and GM flex plate that were part of a balanced assembly. 700.00 for all plus shipping. 2 piece rear seal. Also have a 30 over 4 bolt main block, 400.00 plus shipping.

roy c · 02-26-2017, 01:25 PM

Thanks anyway just need a 350 crank already have the balancer
thanks again

MAURICE BLENDHEIM · 02-27-2017, 12:56 AM

Roy… Checkout Albany NY Craigslist. A guy on there has a 350 crank for $100.00, you can faintly make out a wide parting line on 5-6 rod journal. He notes he can't find the casting number (which would be 3932442) if it was cast and it would very legible and poke you in the eye. A Forged Steel Crank commonly would have an 1182 and they can be hard to see. His phone number is in the Reply. Good Luck…Maurice.

roy c · 02-27-2017, 08:54 PM

Thanks will due

02-24-2017, 10:11 AM	#1
roy c Junior Member Join Date: May 2013 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Looking for 350 sbc forged crank hello if anyone has a 350 forged crank standard journals preferred would be great for a 72 C 20 project also a 8" balancer thanks roy

02-24-2017, 10:39 AM	#2
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 569 Likes: 311 Liked 285 Times in 87 Posts	Re: Looking for 350 sbc forged crank Roy…Where are you located? MB

02-24-2017, 08:24 PM	#3
roy c Junior Member Join Date: May 2013 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Re: Looking for 350 sbc forged crank Long Island ny

02-25-2017, 03:03 PM	#4
Dave Crysler Member Join Date: Sep 2012 Posts: 120 Likes: 0 Liked 0 Times in 0 Posts	Re: Looking for 350 sbc forged crank I have a GM 3.75 stroke crank, rods are 2.1, mains are 2.430,there are new bearings for both, a 6 inch rod was used in this motor, also have a 7 inch ATI balancer and GM flex plate that were part of a balanced assembly. 700.00 for all plus shipping. 2 piece rear seal. Also have a 30 over 4 bolt main block, 400.00 plus shipping. Last edited by Dave Crysler; 02-25-2017 at 06:53 PM. Reason: add more info

02-26-2017, 01:25 PM	#5
roy c Junior Member Join Date: May 2013 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Re: Looking for 350 sbc forged crank Thanks anyway just need a 350 crank already have the balancer thanks again

02-27-2017, 12:56 AM	#6
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 569 Likes: 311 Liked 285 Times in 87 Posts	Re: Looking for 350 sbc forged crank Roy… Checkout Albany NY Craigslist. A guy on there has a 350 crank for $100.00, you can faintly make out a wide parting line on 5-6 rod journal. He notes he can't find the casting number (which would be 3932442) if it was cast and it would very legible and poke you in the eye. A Forged Steel Crank commonly would have an 1182 and they can be hard to see. His phone number is in the Reply. Good Luck…Maurice.

02-27-2017, 08:54 PM	#7
roy c Junior Member Join Date: May 2013 Posts: 8 Likes: 0 Liked 0 Times in 0 Posts	Re: Looking for 350 sbc forged crank Thanks will due