1985 Mustang GT help

Sean Marconette · 09-15-2016, 09:43 AM

You can replace the rear control arms and use a relocation type mount/arms on the upper arms. It has to relocate at the housing and not the body attachment point though. You can overbore the block, but only within the allowable tolerance by the rules.

Again you really need to get a rule book so you can see what you can and cannot do.

A few of us have used a 5 speed, but the majority run a 4 speed Jerico.

09-15-2016, 09:43 AM	#10
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 977 Likes: 794 Liked 275 Times in 76 Posts	Re: 1985 Mustang GT help You can replace the rear control arms and use a relocation type mount/arms on the upper arms. It has to relocate at the housing and not the body attachment point though. You can overbore the block, but only within the allowable tolerance by the rules. Again you really need to get a rule book so you can see what you can and cannot do. A few of us have used a 5 speed, but the majority run a 4 speed Jerico. __________________ Sean Marconette 84 Mustang 5060 SS/N