Blown, injected, 4-valve CJ's at Ennis... - Page 3

Superfan1 · 04-07-2009, 02:56 PM

Thanks, John
Bill Seabrooks - superfan1
Bridgeport, Ct

Chad Rhodes · 04-07-2009, 04:01 PM

sonofabitch. we knew it would be coming. anyone know what the DA was?

Bruce Noland · 04-07-2009, 04:03 PM

Rtaylor,
The joke is on nhra. We don't expect them to change a thing.

John,
The rear wheel horsepower v. flywheel horsepower seem a little off. Check the Moroso calculator and see what you get.

Chad,
About 1,300'

bigshow2966 · 04-07-2009, 04:31 PM

Wasn't Stinnett running 9:70's at Phoenix in AA/SA?

Jim Cassels · 04-07-2009, 04:43 PM

Quote:

Originally Posted by Craig Couris

Just wait until someone actually blueprints one of them.

Craig,
When do you expect your's to be ready to test?
Jim

bill dedman · 04-07-2009, 04:57 PM

Bruce,
My ancient (yellowed) Moroso slide rule "Power/Speed Calculator 89650" says 730 HP at 140 mph for 3,485 pounds.

I don't think ANY of these calculators are dead-on accurate; too many variables, but they do give a ballpark figure that is good for discussion, I think. That additional (100+ pounds I added) weight was in deference to someone who said that's what they actually weighed at Ennis.

Bruce Noland · 04-07-2009, 05:19 PM

Bill,
My new Moroso has the number at 745 ish. I think all the calculators are within 1% to 2%.

Ed Wright · 04-07-2009, 05:34 PM

Quote:

Originally Posted by Chad Rhodes

sonofabitch. we knew it would be coming. anyone know what the DA was?

Chad, my weather station was showing about 2200' when the one I saw go 9.7something @ 140 MPH. Don't know what the 60' was, but appered to me to leave a bit soft. Glad I don't run that class. Talking to Sonny Stancil, the new Dodge sounds dangerous too. 275 hp? Same as the LT1 factory rating, but with larger ports, 1000 cfm throttle body, etc. Going to be interesting for sure.

I know where one of those new blown Cobra Jet race cars is sitting close by here, but he likely won't let me put it on my chassis dyno.

A/SA Fairlane · 04-07-2009, 06:15 PM

Quote:

Originally Posted by Bruce Noland

Bill,
My new Moroso has the number at 745 ish. I think all the calculators are within 1% to 2%.

I'm curious what the Moroso calculator says for DeArmonds 9.71 @134.24 record or Ponds 9.68 @138.79 record ?

bill dedman · 04-07-2009, 06:33 PM

http://store.summitracing.com/partde...5&autoview=sku

MOR-89650

That's the Summit part number for the latest (I assume) version of this old hoss...

The link, above, should take you to that Summit page. $8.95.

Think I'll order a new one; mine is about 40 years old, I think.... no kidding!

04-07-2009, 02:56 PM	#21
Superfan1 VIP Member Join Date: Dec 2007 Location: Bridgeport,CT. Posts: 1,991 Likes: 1,664 Liked 2,632 Times in 438 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... Thanks, John Bill Seabrooks - superfan1 Bridgeport, Ct

04-07-2009, 04:01 PM	#22
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... sonofabitch. we knew it would be coming. anyone know what the DA was? __________________ Chad Rhodes 2113 I/SA

04-07-2009, 04:03 PM	#23
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... Rtaylor, The joke is on nhra. We don't expect them to change a thing. John, The rear wheel horsepower v. flywheel horsepower seem a little off. Check the Moroso calculator and see what you get. Chad, About 1,300' __________________ Bruce Noland 1788 STK

04-07-2009, 04:31 PM	#24
bigshow2966 Senior Member Join Date: Mar 2007 Location: chicago Posts: 654 Likes: 671 Liked 178 Times in 54 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... Wasn't Stinnett running 9:70's at Phoenix in AA/SA?

04-07-2009, 04:57 PM	#26
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... Bruce, My ancient (yellowed) Moroso slide rule "Power/Speed Calculator 89650" says 730 HP at 140 mph for 3,485 pounds. I don't think ANY of these calculators are dead-on accurate; too many variables, but they do give a ballpark figure that is good for discussion, I think. That additional (100+ pounds I added) weight was in deference to someone who said that's what they actually weighed at Ennis. __________________ Bill Last edited by bill dedman; 04-07-2009 at 05:00 PM.

04-07-2009, 05:19 PM	#27
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... Bill, My new Moroso has the number at 745 ish. I think all the calculators are within 1% to 2%. __________________ Bruce Noland 1788 STK

04-07-2009, 06:33 PM	#30
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: Blown, injected, 4-valve CJ's at Ennis... http://store.summitracing.com/partde...5&autoview=sku MOR-89650 That's the Summit part number for the latest (I assume) version of this old hoss... The link, above, should take you to that Summit page. $8.95. Think I'll order a new one; mine is about 40 years old, I think.... no kidding! __________________ Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode