Trans Yoke Roller Tail

ZenzenRacing · 01-12-2020, 12:21 PM

Does anyone have or know who makes a Trans yoke for a T350 for a roller tail, with a 6.5 in from center of joint (1350) to the yoke end? Only one I can find is a Moser that's a 6in center to end.

fordteacherguy · 01-12-2020, 01:05 PM

I didn't go through the full list, but Sonnax has a selection of performance yokes.

https://www.sonnax.com/slip_yokes

Good luck!

Tom Goldman · 01-12-2020, 02:47 PM

Every billet 1350 yoke I've used in the last several years is 6" long , roller or bushing .
With the yoke properly engaged into the trans there should be no need for a longer one .
If the driveshaft is too short and you need the extra 1/2" to get the yoke into the bearing ,you're setting yourself up for other possible issues .
Besides stressing the splines ,the yoke can bind on the spline when the yoke is too far out on the shaft.

killintime6968 · 01-13-2020, 12:42 AM

Did you try Mark Williams

01-12-2020, 12:21 PM	#1
ZenzenRacing Member Join Date: Aug 2005 Posts: 262 Likes: 267 Liked 53 Times in 17 Posts	Trans Yoke Roller Tail Does anyone have or know who makes a Trans yoke for a T350 for a roller tail, with a 6.5 in from center of joint (1350) to the yoke end? Only one I can find is a Moser that's a 6in center to end.

01-12-2020, 01:05 PM	#2
fordteacherguy Member Join Date: Jun 2007 Location: Federal Way, WA Posts: 238 Likes: 32 Liked 160 Times in 51 Posts	Re: Trans Yoke Roller Tail I didn't go through the full list, but Sonnax has a selection of performance yokes. https://www.sonnax.com/slip_yokes Good luck! __________________ Brian Thompson NHRA Stock / Super Stock Class P/SA 6665 SS/MA 6665

01-12-2020, 02:47 PM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,473 Likes: 879 Liked 858 Times in 234 Posts	Re: Trans Yoke Roller Tail Every billet 1350 yoke I've used in the last several years is 6" long , roller or bushing . With the yoke properly engaged into the trans there should be no need for a longer one . If the driveshaft is too short and you need the extra 1/2" to get the yoke into the bearing ,you're setting yourself up for other possible issues . Besides stressing the splines ,the yoke can bind on the spline when the yoke is too far out on the shaft. __________________ Tom Goldman 1500 SG , 1506 STK

01-13-2020, 12:42 AM	#4
killintime6968 Member Join Date: Oct 2009 Location: Whitecourt,Alberta,Canada Posts: 235 Likes: 4,581 Liked 79 Times in 28 Posts	Re: Trans Yoke Roller Tail Did you try Mark Williams __________________ Bruce Cameron 68 Nova 396 E/S 68 Camaro SS/? ex Checkmate Modified