Wheel Studs

[gsa612]

Originally Posted by Mike Pearson

I don't know about Moser but Strange will drill and tap their axles from 1/2 to 5/8 as long as the have not been welded on, Studs tacked etc. I had mine done by Strange about ten years ago and the cost was minimal. They fit the wheels perfectly when I got them back. Turn around was very quick as well.

He's going to need 10 new holes indexed,drilled and tapped.The current knurled stud hole is bigger than a 5/8 threaded stud.Hope it don't have 1" lightening holes between the existing holes then your SOL. gsa612