Trans shield 3rd Gen f body??

Eman · 02-15-2016, 07:54 PM

I have a T350 behind a small block in my 3rd gen Camaro. What trans shield will fit? I've got a CSR, both the form fitting one and the one that goes at the rear section. There is no way the form fitting one will fit with a stock floor pan and firewall that I can see. Tell me if you can get one to work. The rear shield will go in but it's going to take some work around the shift cable and my header collectors. It sure is tight under there!

HR9121 · 02-15-2016, 08:43 PM

I run a TH200 but no shield, all I can say is good luck!

SSGN · 02-16-2016, 10:07 AM

I have some friends having the same issues and looks like a blanket is the way to go. Some nice blankets out there today in a couple different lengths.

Ken Haase · 02-16-2016, 03:35 PM

hey Kevin, what brand of blankets are you referring to? I have the same space issues, trying to use a TH400 in a '65 Chevelle. A really small tunnel since they used PG's only.

When using a blanket, what's everyone's opinion on clearance for the shift cable? Sorry if I steered us off course.

thanks, Ken

SSGN · 02-17-2016, 03:15 AM

Quote:

Originally Posted by Ken Haase

hey Kevin, what brand of blankets are you referring to? I have the same space issues, trying to use a TH400 in a '65 Chevelle. A really small tunnel since they used PG's only.

When using a blanket, what's everyone's opinion on clearance for the shift cable? Sorry if I steered us off course.

thanks, Ken

Most are using the RCi but Stroud and Deist also make blankets. A nice trick is to use 2 of these clamps and mount them to the bolts that hold the tranny pan on, then put a piece of electrical tubeing threw the clamps. This supports the blanket and keeps it off the linkage.
http://www.homedepot.com/p/1-in-Rubb...7795/100160272

Eman · 02-17-2016, 11:10 PM

I tried the metal CSR shield and I can get it around the trans. The shift cable is where I'll have a problem and at the Rt. header collector. I'll need to order a shift cable bracket to modify and i think it will fit with some modifications.
I didn't want to wrap the trans in the blanket, but I do have one to try. I figured the shift cable would be a problem with the blanket also.

02-15-2016, 07:54 PM	#1
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Trans shield 3rd Gen f body?? I have a T350 behind a small block in my 3rd gen Camaro. What trans shield will fit? I've got a CSR, both the form fitting one and the one that goes at the rear section. There is no way the form fitting one will fit with a stock floor pan and firewall that I can see. Tell me if you can get one to work. The rear shield will go in but it's going to take some work around the shift cable and my header collectors. It sure is tight under there!

02-15-2016, 08:43 PM	#2
HR9121 Live Reporter Join Date: Jan 2011 Location: New Bern, NC Posts: 3,467 Likes: 146 Liked 3,363 Times in 731 Posts	Re: Trans shield 3rd Gen f body?? I run a TH200 but no shield, all I can say is good luck! __________________ James Williamson W200 J/SA. SS/JA

02-16-2016, 10:07 AM	#3
SSGN Senior Member Join Date: Feb 2006 Posts: 644 Likes: 131 Liked 140 Times in 51 Posts	Re: Trans shield 3rd Gen f body?? I have some friends having the same issues and looks like a blanket is the way to go. Some nice blankets out there today in a couple different lengths. __________________ The more people I meet the more I like my dog Kevin

02-16-2016, 03:35 PM	#4
Ken Haase Member Join Date: Mar 2007 Posts: 233 Likes: 0 Liked 1 Time in 1 Post	Re: Trans shield 3rd Gen f body?? hey Kevin, what brand of blankets are you referring to? I have the same space issues, trying to use a TH400 in a '65 Chevelle. A really small tunnel since they used PG's only. When using a blanket, what's everyone's opinion on clearance for the shift cable? Sorry if I steered us off course. thanks, Ken

02-17-2016, 11:10 PM	#6
Eman Member Join Date: May 2014 Location: E TN Posts: 473 Likes: 16 Liked 133 Times in 76 Posts	Re: Trans shield 3rd Gen f body?? I tried the metal CSR shield and I can get it around the trans. The shift cable is where I'll have a problem and at the Rt. header collector. I'll need to order a shift cable bracket to modify and i think it will fit with some modifications. I didn't want to wrap the trans in the blanket, but I do have one to try. I figured the shift cable would be a problem with the blanket also.