Roll cage door bar and window crank

buzzinhalfdozen · 06-26-2015, 03:07 PM

SFI specs allow bends in door bars, at least on a 8.50 car...not sure on the lower E.T. cars but doubt it. My personal opinion on swing out bars is not a big fan. Just looking at them in different variations not sure I'd ever put one in my personal car. I see no way ity could be as secure as a PROPERLY welded bar. BTW dale I've used a couple of the cheap, lite cable operated power window set ups from the newer cars on cars not designed for the...works great, however there is a little fab work involved. Can be done for less than 150.00 both doors less wiring and switches.

06-26-2015, 03:07 PM	#19
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Roll cage door bar and window crank SFI specs allow bends in door bars, at least on a 8.50 car...not sure on the lower E.T. cars but doubt it. My personal opinion on swing out bars is not a big fan. Just looking at them in different variations not sure I'd ever put one in my personal car. I see no way ity could be as secure as a PROPERLY welded bar. BTW dale I've used a couple of the cheap, lite cable operated power window set ups from the newer cars on cars not designed for the...works great, however there is a little fab work involved. Can be done for less than 150.00 both doors less wiring and switches. __________________ Joe Buchanan SS/BX 3117