Best Place to Buy GM EATON 800 8.5" Posi

[FED 387]

Dan--- why don't u just buy the 800# preload kit available under Eaton part number 29591-OOS this is the 800 pond pre load kit springs & plates available from Summit for $89.97 ---by th way Summit shows a picture of it ----Has to be cheaper than buying a whole posi unit for about $450 ---Good luck FED 387

[Dan Fahey]

Originally Posted by FED 387

Dan--- why don't u just buy the 800# preload kit available under Eaton part number 29591-OOS this is the 800 pond pre load kit springs & plates available from Summit for $89.97 ---by the way Summit shows a picture of it ----Has to be cheaper than buying a whole posi unit for about $450 ---Good luck FED 387

Thanks FED..
Yeah, seriously thought about that..!

A new Posi would be twice the cost to rebuild but simpler quicker to install.
PN for the Springs is $90, Carbon Disks another $119.00.
It is still good for the street and drag racing.

Have the option keeping it for a street project, the 94 Caprice SSuperwagon being set up for towing or sell to a B-Body racer.
Should be a wash after selling it.

In past have rebuilt a 12bolt Moroso Posi with new Springs from Al's Differentials.
Built a clamp tool out of 2x4 and to force them inside the cavity with a hammer.

Eaton has three types of clutch service kits.
OE, 18 disc (standard), 24 disc (high performance), the modern day, high tech 14 disc carbon fiber design.

Last night studied all about their characteristics.
Still need advice on which of the last 2 to buy.

Dan

[Tim Kish]

Call the Eaton tech line: 800-328-3250 Either Barney or Brent should be able to steer you in the right direction.

[Dan Fahey]

Originally Posted by Tim Kish

Call the Eaton tech line: 800-328-3250 Either Barney or Brent should be able to steer you in the right direction.

That is great information..thanks.

D

[Dan Fahey]

Originally Posted by Tim Kish

Call the Eaton tech line: 800-328-3250 Either Barney or Brent should be able to steer you in the right direction.

FYI..that Number is for some Florida Vacation spam..

Here is his correct information

Brent Bussell -Customer Support
Technical Specialist
Phone# (248)226-6762
Fax# (248)226-6740

[FED 387]

toll free # is 800-328-3850 x 6762-otherwise the other # is his direct line phone #-FED 387

[Dan Fahey]

Originally Posted by FED 387

toll free # is 800-328-3850 x 6762-otherwise the other # is his direct line phone #-FED 387

Thanks:

Brent suggested for Drag Racing using the 24 Disk Steels.
For the Street the 18 Disk Steels..

Dan

[peteprostock]

Dan .. my Eaton catalog shows 1988 -96 10 bolt clip 8.5 / 8.6 with 30 spline 2.73 gear & up # 19559-010

[Tim Kish]

Originally Posted by Dan Fahey

FYI..that Number is for some Florida Vacation spam..

Here is his correct information

Brent Bussell -Customer Support
Technical Specialist
Phone# (248)226-6762
Fax# (248)226-6740

My apologies. I got the number from the product engineer in the cube next to them. He must have fat fingered the number.

[Dan Fahey]

Originally Posted by Tim Kish

My apologies. I got the number from the product engineer in the cube next to them. He must have fat fingered the number.

No Problem..

I have finger dyslexia too

Contacted Brent and he gave me a wealth of information.

Dan