5.13 8.8 Ford gear

[SSDiv6]

Originally Posted by Chris1529

I have moser c clip eliminators in my car too. Been in about 8 years. 33 spline gun drilled moser axles. I run Richmond Street gears as well.

I don't recall seeing anything lower than 5.13 for an 8.8 either.

Yukon makes a 5.71 gear set.
http://www.yukongear.com/ProductDeta...px?ProdID=1955

[Evan Smith]

5.13 should be perfect with a 9x30 in a 5.0 H.O. Stocker.

[Chris1529]

I doubt you could run much lower gear than that in a 1/4 mi. Something like a 5.71 would be great for 1/8 mile though.

You building a stock or super stock, or just upgrading the rear you have in your Mustang now?

[Mark Yacavone]

Originally Posted by Chris1529

I doubt you could run much lower gear than that in a 1/4 mi. Something like a 5.71 would be great for 1/8 mile though.

You building a stock or super stock, or just upgrading the rear you have in your Mustang now?

Chris, I wasn't asking.... for a V 8 Mustang

[Chris1529]

I'm sorry Mark. I didn't read the post close enough. I thought Josh was asking.

[Jepperson]

Im trying to upgrade my ole' Mustang bracket car to run crate motor stock. It has a 4.56 in it with a 28x10 tire, I put a set of 30x9 radials on it and it needs more gear. I need something to drop my R/T's too, thought a 5.13 and radials would pick them up to. The car will probably just run a 1/4 mile two or three times a year max.

[Chris1529]

what engine combo you claiming?

[Jepperson]

270/250 302