Air Cleaner Question - Page 2

Doug Blackley · 10-01-2011, 06:25 PM

Wish I'd known they allowed them again. Went and bought the GM open base after they told us we couldn't use them anymore. Nice to know they will let us run them again.

Tom keedle · 10-01-2011, 08:56 PM

is this an IHRA or NHRA thing?

Wade_Owens · 10-06-2011, 03:57 PM

What is the namebrand of the alum base you guys are using?

Thanks!

Wade O

mopar jeff · 10-11-2011, 01:29 PM

Quote:

Originally Posted by stk4178

I am allowed to replace the tubing that runs from the throttle body to the filer itself. This is for a 93 Mustang

Can you tell me where this is printed. I would like to see it. Thanks.

Mike Fuller · 10-11-2011, 09:27 PM

Quote:

Originally Posted by Wade_Owens

What is the namebrand of the alum base you guys are using?

Thanks!

Wade O

I have seen these on a number of division one cars. I can't find one like the one on Jim B.'s car though. Looks like it could be worth something.

danny waters sr · 10-11-2011, 09:45 PM

Not trying to rob this topic but,,
Speaking of air cleaners, Does anyone have a bottom to fit a 4-gc carb ?

Or any ideas for performance using the air cleaners in stock?

Ed Sroka · 10-11-2011, 10:26 PM

Keep in mind, there are a variety of spun and stamped aluminum bases available. The differences in profile can be significant. There are bases that perform well and others that create issues. The steel base without radius that includes areas to accommodate the needle and seat/float adjuster is one example.

We test these bases using flow rates to 1200 SCFM each day. Filter outlet diffusion is very important. Pay attention to the radius design of the rise and be cognizant of the fact that a drop base with a lid creates velocity concerns, especially with a short filter.

There are ways to maximize this profile and provide a consistent delivery to the boosters.

Jim Kaekel · 10-12-2011, 09:59 AM

Enter in part no. 26092 into the attached search. This is what you're looking for. http://www.allstarperformance.com/search.htm They can be purchased direct or from any Allstar Performance dealer.

10-01-2011, 06:25 PM	#11
Doug Blackley Member Join Date: Dec 2001 Location: Hanover, MA Posts: 430 Likes: 3 Liked 1 Time in 1 Post	Re: Air Cleaner Question Wish I'd known they allowed them again. Went and bought the GM open base after they told us we couldn't use them anymore. Nice to know they will let us run them again. __________________ Doug Blackley 1697 STK

10-01-2011, 08:56 PM	#12
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: Air Cleaner Question is this an IHRA or NHRA thing?

10-06-2011, 03:57 PM	#13
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: Air Cleaner Question What is the namebrand of the alum base you guys are using? Thanks! Wade O

10-11-2011, 09:45 PM	#16
danny waters sr VIP Member Join Date: Apr 2007 Location: lagrange,nc Posts: 2,224 Likes: 1 Liked 0 Times in 0 Posts	Re: Air Cleaner Question Not trying to rob this topic but,, Speaking of air cleaners, Does anyone have a bottom to fit a 4-gc carb ? Or any ideas for performance using the air cleaners in stock? __________________ Danny Waters, Sr / 73 Duster "340"

10-11-2011, 10:26 PM	#17
Ed Sroka Junior Member Join Date: Aug 2003 Location: Lake Zurich, IL Posts: 22 Likes: 0 Liked 1 Time in 1 Post	Re: Air Cleaner Question Keep in mind, there are a variety of spun and stamped aluminum bases available. The differences in profile can be significant. There are bases that perform well and others that create issues. The steel base without radius that includes areas to accommodate the needle and seat/float adjuster is one example. We test these bases using flow rates to 1200 SCFM each day. Filter outlet diffusion is very important. Pay attention to the radius design of the rise and be cognizant of the fact that a drop base with a lid creates velocity concerns, especially with a short filter. There are ways to maximize this profile and provide a consistent delivery to the boosters.

10-12-2011, 09:59 AM	#18
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,226 Likes: 133 Liked 529 Times in 107 Posts	Re: Air Cleaner Question Enter in part no. 26092 into the attached search. This is what you're looking for. http://www.allstarperformance.com/search.htm They can be purchased direct or from any Allstar Performance dealer. __________________ Jim Kaekel 3836 STK