3rd generation Camaro

Bobby Zlatkin · 12-07-2009, 05:47 AM

Was wondering what was involved in changing out the 700R4 for a Turbo 350.

Is the trans a different length?
Will the driveshaft need to be lengthened/shortened?
Is trans mount in same location?
Can the original crossmember be used and in the same location?
How about the tunnel, any problems there?

Alan Roehrich · 12-07-2009, 07:35 AM

A TH 350 is shorter than a 700 R4, and the mount is closer to the front. No, the original crossmember cannot remain in the same location. No problems with the tunnel. If you can find a car that was built with a 200 Metric, the crossmember, mount, driveshaft, and torque arm mount are where you need them. You will have a very hard time finding a TH 350 extension housing with the mounting holes and mounting bosses for the torque arm brackets.

Ron Middleton · 12-07-2009, 09:31 AM

B&M makes a reasonably priced and simply bracket for the torque arm. Part No. 30299. Use the stock driveshaft for 1982 Camaro with TH200.

bobby · 12-07-2009, 10:05 AM

You can get on www.LS1tech.com there are guys over there that are putting th400 and 4l80 into these cars.

12-07-2009, 05:47 AM	#1
Bobby Zlatkin Member Join Date: Mar 2003 Location: Mills River, NC Posts: 417 Likes: 0 Liked 0 Times in 0 Posts	3rd generation Camaro Was wondering what was involved in changing out the 700R4 for a Turbo 350. Is the trans a different length? Will the driveshaft need to be lengthened/shortened? Is trans mount in same location? Can the original crossmember be used and in the same location? How about the tunnel, any problems there? __________________ Bobby & Norene Zlatkin L/SA

12-07-2009, 07:35 AM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,098 Likes: 1,546 Liked 1,776 Times in 404 Posts	Re: 3rd generation Camaro A TH 350 is shorter than a 700 R4, and the mount is closer to the front. No, the original crossmember cannot remain in the same location. No problems with the tunnel. If you can find a car that was built with a 200 Metric, the crossmember, mount, driveshaft, and torque arm mount are where you need them. You will have a very hard time finding a TH 350 extension housing with the mounting holes and mounting bosses for the torque arm brackets. __________________ Alan Roehrich 212A G/S

12-07-2009, 09:31 AM	#3
Ron Middleton Member Join Date: Jan 1970 Location: Jackson, Ms. Posts: 350 Likes: 183 Liked 12 Times in 4 Posts	Re: 3rd generation Camaro B&M makes a reasonably priced and simply bracket for the torque arm. Part No. 30299. Use the stock driveshaft for 1982 Camaro with TH200. __________________ #4892 J/SA. We are what we repeatedly do. Excellence then, is not an act, but a habit.” - Aristotle

12-07-2009, 10:05 AM	#4
bobby Member Join Date: Jun 2008 Location: League City, Texas Posts: 243 Likes: 0 Liked 0 Times in 0 Posts	Re: 3rd generation Camaro You can get on www.LS1tech.com there are guys over there that are putting th400 and 4l80 into these cars. __________________ Next time wave all of your fingers at me.