Stock Valve Lift

larry dowty · 09-10-2009, 09:30 AM

ALAN has any one ? that when they know it is diff.

Jeff Lee · 09-10-2009, 11:59 AM

It's NHRA's testing procedure so they should have the tools necessary to do the job. If their lifter does not match your lifter's plunger height you "could" argue it is an invalid test if the test shows you are out of compliance. But if you want to avoid such issues (and I recommend you do), carry your own checking / solid lifter with the correct specs. And yes, the check is made at zero lash.
My opinion is finding every .001" of lift is not a real big deal. The rest of the cam specs is what really makes a big deal. I've been .015"-.020" under max lift and never felt it was a problem. Point is, like Ron Mattson stated below, give yourself a cushion.

Alan Roehrich · 09-10-2009, 01:08 PM

Jeff, I asked this very question a week or two ago. I was told by a division tech director that NHRA supplies the solid lifter for checking lift on a hydraulic cam and you may not supply your own. I was working on a hydraulic lifter engine, and was going to just get an extra solid lifter and check everything, and give the guy the lifter to keep with him. I was told NHRA would not use any lifter I was going to provide, they would use their own.

Rory McNeil · 09-10-2009, 08:22 PM

Quote:

Originally Posted by Alan Roehrich

Jeff, I asked this very question a week or two ago. I was told by a division tech director that NHRA supplies the solid lifter for checking lift on a hydraulic cam and you may not supply your own. I was working on a hydraulic lifter engine, and was going to just get an extra solid lifter and check everything, and give the guy the lifter to keep with him. I was told NHRA would not use any lifter I was going to provide, they would use their own.

I don`t how "oddball" a 5.0 Mustang Stocker is, but I`ve torn down 3 times here in Div.6, and the certification team never had a "solid" Ford hyd. roller lifter in their kit. The first time, I ended up having to disassemble on of my own lifters,& "plug" it. After that, I just kept a plugged lifter of my own in my tool box, and on 1 ocassion, the cert .team borrowed my checking lifter.

Alan Roehrich · 09-10-2009, 08:46 PM

I suppose I shouldn't be surprised that they don't have a lifter for that. They certainly should. Shoot, I have one that I use to check piston to valve clearance.

Gary H Humrichouse · 09-10-2009, 10:18 PM

The check lifter they use it made by Clark Holroyd. He will sell one to you.

Alan Roehrich · 09-10-2009, 01:10 PM

Quote:

Originally Posted by larry dowty

ALAN has any one ? that when they know it is diff.

Larry, I am not aware of anyone successfully challenging a ruling in that manner. I am aware of a couple of cars being tossed, despite being able to provide their own solid lifter and show it was a normal standard solid lifter for the car, as well as showing the correct lift with their checking lifter. I do not remember the names at this time, I think one of them was a small block Chrysler of some sort.

Jeff Lee · 09-10-2009, 05:18 PM

Alan,
That's fine on a "normal" application; i.e., SBC, SBF, the normal big blocks, etc.
I raced a 2.2L FWD with cam followers or tappet buckets, whatever they were called. I set records with the car. NHRA has nothing close to those in their arsenal.
I can't see the problem if you can show the checking lifter is identical in specs to the lifter that came out. But it is their game and you are right.

Alan Roehrich · 09-10-2009, 05:35 PM

Jeff, I have no doubt at all that NHRA doesn't have the stuff to check oddball engines.

It seems sort of odd that you couldn't just bring your own solid lifter to show how you checked the lift on your hydraulic lifter engine, but I guess they figure you can "game the game" with the right parts, and you probably can.

gmonde · 09-10-2009, 07:23 PM

if you have your own lifter and they will not except it ,have the info ready to present ,,have a mesurement and a bench mark part that can inserted in the in the cup of the lifter that can be mesured with calipers as that is the tool of choice they will more than likely see ,if you are that close to the tolerance ,,but as jeff said the lift doesent have to be to the max or even over , i found a huge gain in lift by switching to after market stamped steel rockers ,gained .030 of lift and ran those for two weekends before a divisional event and it didnt drop any et (didnt change anything else)

gmonde

09-10-2009, 09:30 AM	#1
larry dowty Member Join Date: Jan 2005 Location: chewelah wa Posts: 283 Likes: 0 Liked 11 Times in 4 Posts	Re: Stock Valve Lift ALAN has any one ? that when they know it is diff. __________________ larry dowty 6388 SS Last edited by larry dowty; 09-10-2009 at 11:12 AM.

09-10-2009, 11:59 AM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Stock Valve Lift It's NHRA's testing procedure so they should have the tools necessary to do the job. If their lifter does not match your lifter's plunger height you "could" argue it is an invalid test if the test shows you are out of compliance. But if you want to avoid such issues (and I recommend you do), carry your own checking / solid lifter with the correct specs. And yes, the check is made at zero lash. My opinion is finding every .001" of lift is not a real big deal. The rest of the cam specs is what really makes a big deal. I've been .015"-.020" under max lift and never felt it was a problem. Point is, like Ron Mattson stated below, give yourself a cushion. __________________ Jeff Lee 7494 D/S '70 AMX

09-10-2009, 01:08 PM	#3
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,133 Likes: 1,605 Liked 1,915 Times in 430 Posts	Re: Stock Valve Lift Jeff, I asked this very question a week or two ago. I was told by a division tech director that NHRA supplies the solid lifter for checking lift on a hydraulic cam and you may not supply your own. I was working on a hydraulic lifter engine, and was going to just get an extra solid lifter and check everything, and give the guy the lifter to keep with him. I was told NHRA would not use any lifter I was going to provide, they would use their own. __________________ Alan Roehrich 212A G/S

09-10-2009, 08:46 PM	#5
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,133 Likes: 1,605 Liked 1,915 Times in 430 Posts	Re: Stock Valve Lift I suppose I shouldn't be surprised that they don't have a lifter for that. They certainly should. Shoot, I have one that I use to check piston to valve clearance. __________________ Alan Roehrich 212A G/S

09-10-2009, 10:18 PM	#6
Gary H Humrichouse Junior Member Join Date: Jan 2008 Location: calif Posts: 11 Likes: 0 Liked 1 Time in 1 Post	Re: Stock Valve Lift The check lifter they use it made by Clark Holroyd. He will sell one to you. __________________ Gary H Humrichouse 736 STK

09-10-2009, 05:18 PM	#8
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Stock Valve Lift Alan, That's fine on a "normal" application; i.e., SBC, SBF, the normal big blocks, etc. I raced a 2.2L FWD with cam followers or tappet buckets, whatever they were called. I set records with the car. NHRA has nothing close to those in their arsenal. I can't see the problem if you can show the checking lifter is identical in specs to the lifter that came out. But it is their game and you are right. __________________ Jeff Lee 7494 D/S '70 AMX

09-10-2009, 05:35 PM	#9
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,133 Likes: 1,605 Liked 1,915 Times in 430 Posts	Re: Stock Valve Lift Jeff, I have no doubt at all that NHRA doesn't have the stuff to check oddball engines. It seems sort of odd that you couldn't just bring your own solid lifter to show how you checked the lift on your hydraulic lifter engine, but I guess they figure you can "game the game" with the right parts, and you probably can. __________________ Alan Roehrich 212A G/S

09-10-2009, 07:23 PM	#10
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: Stock Valve Lift if you have your own lifter and they will not except it ,have the info ready to present ,,have a mesurement and a bench mark part that can inserted in the in the cup of the lifter that can be mesured with calipers as that is the tool of choice they will more than likely see ,if you are that close to the tolerance ,,but as jeff said the lift doesent have to be to the max or even over , i found a huge gain in lift by switching to after market stamped steel rockers ,gained .030 of lift and ran those for two weekends before a divisional event and it didnt drop any et (didnt change anything else) gmonde