Vp c-11 pump gas

[SDT1DYI]

Originally Posted by garyc

HI
rumor has it that c11 has a hard time passing fuel check, firing up new build this weekend, every thnig new motor 8.5-1 etc. have fresh c-11, was going to flush new fuel system cell,pump, lines etc with pump gas 93 , would it contaminate cell, foam etc?

I would remove the foam in the fuel cell first.
C-11 will be a touch faster than C 12 in your low compression motor.
C 11 Vapor rate is very low , keep in metal cans and in cool places.
Clean out you inline filter and put C11 in it.
You can take fuel to the fuel test pe


trailer before hand and confirm its good if your concerned for any reason.

Steve Teeter Stk/SS 620