Air Shifter for Turboaction shifter W clean Nuetral

[Eric Merryfield]

Lost yet another round going 1-3 on launch so its time to put air/electric in it and be done with it.

Its a Turbo Action 3 speed reverse pattern with the clean neutral valve body, which makes shifting by hand very challenging and causes all the issues.....a PPP would not be an issue.

Suggestions?

Thanks

Eric

[Mark Markow]

eric go with the precision products. shifter

[Ed Wright]

Originally Posted by Mark Markow

eric go with the precision products. shifter

X2!! Best shifter I ever owned.

[Bryan Worner]

Get the Biondo air shift deal and a Turbo Action E Shift Controller. Since you already have the Turbo Action shifter, no use getting rid of that, unless you want to.

[Eric Merryfield]

Originally Posted by Bryan Worner

Get the Biondo air shift deal and a Turbo Action E Shift Controller. Since you already have the Turbo Action shifter, no use getting rid of that, unless you want to.

Thank You all for the suggestions, I have a complete ACD system which will work with clean neutral, on order and hope to be ready to go with it for Atco. I know how nice the PPP's are as I have one in the dragpak, but the existing turbo action shifter is best for the unique fit in the Dakota and its period correct for this pilot vehicle, former Mopar Performance Team Truck.

It will be different to launch with my hands on the wheel, like a street car.

Thanks

Eric

[Dave Muller]

Pardon my ignorance, but could someone explain to me what the "clean neutral" valve body is about, and how it leads to this problem?

Since I was planning on a Turbo Action shifter in my build I just want to be sure I'm not setting myself up for a problem.

[grncpe]

Eric, I have the biondo seloniod on the reverse cheetah shifter,(air) no problems, bolts right on, I also have a digital delay programmer, that's who makes the unit to punch in the shift points. I can send you pics of both before I put them in the Cuda.
Tom

[Kenny McCoy]

Acd
610-987-8999