accusump plumbing

hrs1326 · 04-04-2022, 08:00 AM

I am wanting to know about plumbing a Moroso Accusump with electric valve.
Can ball valve be eliminated?
can electric valve be installed on oil filter adapter?

The Oil line would leave accusump and be routed to electric valve attached to oil filter adapter

thank you in advance

Mike Mans · 04-05-2022, 03:52 PM

We run our accusumps with the electric solenoid mounted right to the accusump, and the exit line feeding right to my remote filter adapter. It works flawlessly, I highly recommend it. This does eliminate the ball-valve too, yes. Our solenoids are connected to the ignition switch, so they intentionally push a few quarts of pressurized oil into the motor each time I am about to hit the starter. When the motor is running, the pump pressure stabilizes and it pushes the couple quarts back into the accusump and I had a fully primed engine before every start up.

Larry Hill · 04-06-2022, 06:57 AM

Mike what electric valve do you use? Thanks

Mike Mans · 04-06-2022, 11:57 AM

Hey Larry - We use the kit from Moroso in the link below. It works really well! It shows that they are out of stock, but I would think a little Google searching may bring up whatever the source is for that solenoid and it's just a pipe nipple that connects it to the accumulator container too.

https://www.moroso.com/solenoid-valve23905/

SSDiv6 · 04-06-2022, 01:54 PM

Quote:

Originally Posted by Mike Mans

Hey Larry - We use the kit from Moroso in the link below. It works really well! It shows that they are out of stock, but I would think a little Google searching may bring up whatever the source is for that solenoid and it's just a pipe nipple that connects it to the accumulator container too.

https://www.moroso.com/solenoid-valve23905/

Canton also makes several accumulator electric valves.

https://www.cantonracingproducts.com...or/valves.html

Larry Hill · 04-06-2022, 02:14 PM

Thanks to both of y’all.

Frank Castros · 04-06-2022, 10:06 PM

I met Mike Canton back in the seventies when he worked for Dick Moroso, he's a very smart dude.

CMcAllister · 04-08-2022, 12:39 AM

I use an electric valve mounted on the accusump. They replace the manual ball valve if that's what you are asking. One advantage is the electric valve will allow the can to charge when it is off but not allow oil to go back to the engine until it is turned on.

I use a dedicated switch to control the valve as desired.

Pre-oil the engine before cranking if it has been sitting overnight or longer. Turn it off once the engine is running to allow it to refill. Leave it off until I roll into the water. Turn it on at that point and leave it on until after making the turn off. Turn it off at that point and leave it refill the can while driving back to the trailer and back to the lanes.

Also useful for pre-oiling a fresh engine. Just have to fill, assemble and charge it, usually out of the car.

That was my routine.

hrs1326 · 04-08-2022, 06:59 AM

al always you guys are very helpful, I appreciate the info
race on!

Signman · 04-08-2022, 08:51 AM

Have one of the Moroso valves will part with.
PM with a fair offer

04-04-2022, 08:00 AM	#1
hrs1326 Junior Member Join Date: Apr 2022 Posts: 52 Likes: 2 Liked 19 Times in 10 Posts	accusump plumbing I am wanting to know about plumbing a Moroso Accusump with electric valve. Can ball valve be eliminated? can electric valve be installed on oil filter adapter? The Oil line would leave accusump and be routed to electric valve attached to oil filter adapter thank you in advance

04-05-2022, 03:52 PM	#2
Mike Mans Member Join Date: Jan 2006 Posts: 177 Likes: 21 Liked 299 Times in 48 Posts	Re: accusump plumbing We run our accusumps with the electric solenoid mounted right to the accusump, and the exit line feeding right to my remote filter adapter. It works flawlessly, I highly recommend it. This does eliminate the ball-valve too, yes. Our solenoids are connected to the ignition switch, so they intentionally push a few quarts of pressurized oil into the motor each time I am about to hit the starter. When the motor is running, the pump pressure stabilizes and it pushes the couple quarts back into the accusump and I had a fully primed engine before every start up.

04-06-2022, 06:57 AM	#3
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,628 Likes: 1,917 Liked 10,676 Times in 2,220 Posts	Re: accusump plumbing Mike what electric valve do you use? Thanks __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-06-2022, 11:57 AM	#4
Mike Mans Member Join Date: Jan 2006 Posts: 177 Likes: 21 Liked 299 Times in 48 Posts	Re: accusump plumbing Hey Larry - We use the kit from Moroso in the link below. It works really well! It shows that they are out of stock, but I would think a little Google searching may bring up whatever the source is for that solenoid and it's just a pipe nipple that connects it to the accumulator container too. https://www.moroso.com/solenoid-valve23905/

04-06-2022, 02:14 PM	#6
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,628 Likes: 1,917 Liked 10,676 Times in 2,220 Posts	Re: accusump plumbing Thanks to both of y’all. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-06-2022, 10:06 PM	#7
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,959 Likes: 2,548 Liked 2,626 Times in 950 Posts	Re: accusump plumbing I met Mike Canton back in the seventies when he worked for Dick Moroso, he's a very smart dude.

04-08-2022, 12:39 AM	#8
CMcAllister Senior Member Join Date: Sep 2006 Location: Fulton County, PA Posts: 611 Likes: 16 Liked 911 Times in 255 Posts	Re: accusump plumbing I use an electric valve mounted on the accusump. They replace the manual ball valve if that's what you are asking. One advantage is the electric valve will allow the can to charge when it is off but not allow oil to go back to the engine until it is turned on. I use a dedicated switch to control the valve as desired. Pre-oil the engine before cranking if it has been sitting overnight or longer. Turn it off once the engine is running to allow it to refill. Leave it off until I roll into the water. Turn it on at that point and leave it on until after making the turn off. Turn it off at that point and leave it refill the can while driving back to the trailer and back to the lanes. Also useful for pre-oiling a fresh engine. Just have to fill, assemble and charge it, usually out of the car. That was my routine.

04-08-2022, 06:59 AM	#9
hrs1326 Junior Member Join Date: Apr 2022 Posts: 52 Likes: 2 Liked 19 Times in 10 Posts	Re: accusump plumbing al always you guys are very helpful, I appreciate the info race on!

04-08-2022, 08:51 AM	#10
Signman Senior Member Join Date: Oct 2003 Location: Lower Slower Delaware Posts: 535 Likes: 22 Liked 269 Times in 99 Posts	Re: accusump plumbing Have one of the Moroso valves will part with. PM with a fair offer __________________ Frank Ferrucci I/SA 1271 "Be Thankful for the Gifts You are Given"