Mopar k member

qflash · 12-06-2020, 07:44 PM

Looking to buy a tubular k member for a '70 A-body Mopar. Anyone help out?
Ron Miller

dragracedr · 12-07-2020, 11:23 AM

Do you want to keep the torsion bars or go coil-over for suspension?

qflash · 12-07-2020, 04:01 PM

Coil-over would be a definite improvement.

dragracedr · 12-07-2020, 06:27 PM

I have an AlterK-tion in my car and am pleased. No engine mounts, I run engine and mid plates. If your planning on leaf spring/caltrac rear I would suggest a different manufacturer. The AlterK, I don't feel, allows enough front travel for that suspension would works just fine with my 4-link, and would well with ladder bars

dragracedr · 12-07-2020, 06:30 PM

I forgot to ask. Do you have stock front frame rails? If so then I recommend the Altercation. If a fll chassis car, go front struts.

qflash · 12-07-2020, 07:11 PM

My car will be a 4-link car with 14-point roll cage. Car will have a big cube small block. Sounds like the AlterKation would be a good set up.
Thanks for your help.
Ron

ss3011 · 12-08-2020, 07:24 PM

I think QA1 has a tubular k-member also.

340Cuda · 12-12-2020, 03:15 PM

This guy does great work however I don't know how to contact him other than Facebook.

Tory Shellehamer

https://www.facebook.com/tory.shellehamer

Photo...

https://www.facebook.com/photo/?fbid...824177&__cft__[0]=AZVrFWuANodwU-zNWb-SeVUb0gS00X-E5d0AZIOtwlUzUvzHeneQgE13s9gi5R8-xzE3fgOVDpfNJTAR_DsK6qVn70ZoLbxbTn0_FV79BNg7hr2P0G in5cIXPW39NZAGqo0&__tn__=EH-R

12-06-2020, 07:44 PM	#1
qflash Junior Member Join Date: Apr 2013 Location: Raised in PA, Live in San Angelo, TX Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	Mopar k member Looking to buy a tubular k member for a '70 A-body Mopar. Anyone help out? Ron Miller

12-07-2020, 11:23 AM	#2
dragracedr Junior Member Join Date: Dec 2008 Posts: 16 Likes: 3 Liked 16 Times in 3 Posts	Re: Mopar k member Do you want to keep the torsion bars or go coil-over for suspension?

12-07-2020, 04:01 PM	#3
qflash Junior Member Join Date: Apr 2013 Location: Raised in PA, Live in San Angelo, TX Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	Re: Mopar k member Coil-over would be a definite improvement.

12-07-2020, 06:27 PM	#4
dragracedr Junior Member Join Date: Dec 2008 Posts: 16 Likes: 3 Liked 16 Times in 3 Posts	Re: Mopar k member I have an AlterK-tion in my car and am pleased. No engine mounts, I run engine and mid plates. If your planning on leaf spring/caltrac rear I would suggest a different manufacturer. The AlterK, I don't feel, allows enough front travel for that suspension would works just fine with my 4-link, and would well with ladder bars

12-07-2020, 06:30 PM	#5
dragracedr Junior Member Join Date: Dec 2008 Posts: 16 Likes: 3 Liked 16 Times in 3 Posts	Re: Mopar k member I forgot to ask. Do you have stock front frame rails? If so then I recommend the Altercation. If a fll chassis car, go front struts.

12-07-2020, 07:11 PM	#6
qflash Junior Member Join Date: Apr 2013 Location: Raised in PA, Live in San Angelo, TX Posts: 68 Likes: 0 Liked 0 Times in 0 Posts	Re: Mopar k member My car will be a 4-link car with 14-point roll cage. Car will have a big cube small block. Sounds like the AlterKation would be a good set up. Thanks for your help. Ron

12-08-2020, 07:24 PM	#7
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 906 Likes: 70 Liked 237 Times in 112 Posts	Re: Mopar k member I think QA1 has a tubular k-member also.

12-12-2020, 03:15 PM	#8
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,649 Likes: 3,758 Liked 752 Times in 325 Posts	Re: Mopar k member This guy does great work however I don't know how to contact him other than Facebook. Tory Shellehamer https://www.facebook.com/tory.shellehamer Photo... https://www.facebook.com/photo/?fbid...824177&__cft__[0]=AZVrFWuANodwU-zNWb-SeVUb0gS00X-E5d0AZIOtwlUzUvzHeneQgE13s9gi5R8-xzE3fgOVDpfNJTAR_DsK6qVn70ZoLbxbTn0_FV79BNg7hr2P0G in5cIXPW39NZAGqo0&__tn__=EH-R