MoPar stickshift parts

Rory McNeil · 06-02-2019, 11:31 AM

Quick Time scattershield for SB MoPar. SFI version with window for easy counterweight adjustment. comes with block plate. SFI sticker expired. $400.00
MoPar input shaft for G Force G101A 4 speed transmission. 1 3/16"x18 "Hemi" spline. $250.00
MoPar front bearing retainer for G101A trans. $90.00
Also have a Long shifter mounting plate only for Long Pistol Grip V Gate shifter for G101A 4 speed. standard location (20 1/2" from front of case). $30.00
Homemade shifter mounting plate for Long Pistol Grip V Gate shifter, with shifter rods. (no Heim rod ends, just the tubes). Locates shifter 26" from front of case, This bracket locates the shifter about 2 inches higher than standard position, so reverse lever on trans points up, rather than down. $60.00.

68Tom440 · 01-15-2020, 02:32 AM

Hello sir, is the mopar main shaft and bearing retainer still available? Thank you, have a great day.

Rory McNeil · 01-15-2020, 06:17 PM

Quote:

Originally Posted by 68Tom440

Hello sir, is the mopar main shaft and bearing retainer still available? Thank you, have a great day.

Not a main shaft, but an input shaft, and front bearing retainer. Yes, both pieces are still available.

68Tom440 · 01-18-2020, 10:19 PM

I apologize for that, I dont know why I said main shaft. Fantastic. I'm trying to get things situated to install a GF4A/101A behind a 440. Are you still looking to get $250 for the input and $90 for the bearing retainer? Also, if you have any advice or experience you can share on this type of trans in a mopar, that would be really awesome. Thank you, have a good day sir.

Rod Greene · 03-02-2020, 03:30 PM

Rory you have a PM

06-02-2019, 11:31 AM	#1
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,309 Likes: 313 Liked 1,097 Times in 300 Posts	MoPar stickshift parts Quick Time scattershield for SB MoPar. SFI version with window for easy counterweight adjustment. comes with block plate. SFI sticker expired. $400.00 MoPar input shaft for G Force G101A 4 speed transmission. 1 3/16"x18 "Hemi" spline. $250.00 MoPar front bearing retainer for G101A trans. $90.00 Also have a Long shifter mounting plate only for Long Pistol Grip V Gate shifter for G101A 4 speed. standard location (20 1/2" from front of case). $30.00 Homemade shifter mounting plate for Long Pistol Grip V Gate shifter, with shifter rods. (no Heim rod ends, just the tubes). Locates shifter 26" from front of case, This bracket locates the shifter about 2 inches higher than standard position, so reverse lever on trans points up, rather than down. $60.00. __________________ NHRA 6390 STK M/S 85 Mustang

01-15-2020, 02:32 AM	#2
68Tom440 Junior Member Join Date: Jan 2020 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Re: MoPar stickshift parts Hello sir, is the mopar main shaft and bearing retainer still available? Thank you, have a great day.

01-18-2020, 10:19 PM	#4
68Tom440 Junior Member Join Date: Jan 2020 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Re: MoPar stickshift parts I apologize for that, I dont know why I said main shaft. Fantastic. I'm trying to get things situated to install a GF4A/101A behind a 440. Are you still looking to get $250 for the input and $90 for the bearing retainer? Also, if you have any advice or experience you can share on this type of trans in a mopar, that would be really awesome. Thank you, have a good day sir.

03-02-2020, 03:30 PM	#5
Rod Greene Senior Member Join Date: Mar 2002 Location: TN Posts: 530 Likes: 415 Liked 242 Times in 81 Posts	Re: MoPar stickshift parts Rory you have a PM __________________ Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects.