305 stocker heads

PJ305 · 08-18-2007, 12:55 PM

I need a set of #416 heads that will give me valve clearance on a dish piston motor with no valve reliefs. These heads have to be legal for stock and ready to bolt on. Post what you have & a contact number. Thank You.

Robert Simpson · 08-18-2007, 10:58 PM

I have two pair of bone stock heads 416's, they have not had a valve job. I know you stated ready to bolt on. But, if you were looking for some good complete cores, let me know.

Robert Simpson
rsimp18@hotmail.com
2402 H/SA

Tom Moock · 08-19-2007, 02:46 AM

pj305, I have a brand new set of heads-up #416 heads on a spare motor never been run, I will sell for $1500.00 plus freight. Tom Moock tmcm@galaxycable.net 402-432-5155

tgriffith · 08-19-2007, 09:08 AM

get ahold of chuck porter,,,,I have a complete josey 305 with heads still bolted on,,,,its a LEGAL 85 motor ,,,it was last run about 5 years ago and went .80 under,,,,,,,,,he might want to sell it and you can pick it up at my house here in VA.....it has the 416`s on it......motor is complete minus intake

tim

REGGIE WINKLES · 08-19-2007, 10:13 AM

Look at Racingjunk.com ad #932768. I think this stuff belongs to the Mace clan out of
Jacksonville, Fla. Two sets of 416 heads ready to go and these guys always have good
parts.

Reggie Winkles
4102 J/Stick

PJ305 · 08-20-2007, 08:39 AM

Tim,

Is that engine a dish piston? Do you have a Number or E-mail for Chuck.

Thank You

tgriffith · 08-20-2007, 09:49 AM

its a flat top 85 motor,,,,I`ll find chucks number today

tgriffith · 08-20-2007, 09:52 AM

I just checked,,,,,,55 cc`s for dish or flat top,,,,

08-18-2007, 12:55 PM	#1
PJ305 Member Join Date: Jul 2007 Posts: 137 Likes: 0 Liked 5 Times in 4 Posts	305 stocker heads I need a set of #416 heads that will give me valve clearance on a dish piston motor with no valve reliefs. These heads have to be legal for stock and ready to bolt on. Post what you have & a contact number. Thank You.

08-18-2007, 10:58 PM	#2
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 808 Likes: 7 Liked 20 Times in 12 Posts	Re: 305 stocker heads I have two pair of bone stock heads 416's, they have not had a valve job. I know you stated ready to bolt on. But, if you were looking for some good complete cores, let me know. Robert Simpson rsimp18@hotmail.com 2402 H/SA

08-19-2007, 02:46 AM	#3
Tom Moock Senior Member Join Date: May 2004 Posts: 801 Likes: 1 Liked 10 Times in 6 Posts	Re: 305 stocker heads pj305, I have a brand new set of heads-up #416 heads on a spare motor never been run, I will sell for $1500.00 plus freight. Tom Moock tmcm@galaxycable.net 402-432-5155

08-19-2007, 10:13 AM	#5
REGGIE WINKLES Member Join Date: Jun 2007 Location: St. Augustine, Fla. Posts: 229 Likes: 572 Liked 39 Times in 9 Posts	Re: 305 stocker heads Look at Racingjunk.com ad #932768. I think this stuff belongs to the Mace clan out of Jacksonville, Fla. Two sets of 416 heads ready to go and these guys always have good parts. Reggie Winkles 4102 J/Stick

08-20-2007, 08:39 AM	#6
PJ305 Member Join Date: Jul 2007 Posts: 137 Likes: 0 Liked 5 Times in 4 Posts	Re: 305 stocker heads Tim, Is that engine a dish piston? Do you have a Number or E-mail for Chuck. Thank You

08-19-2007, 09:08 AM	#4
tgriffith Member Join Date: May 2002 Posts: 187 Likes: 0 Liked 0 Times in 0 Posts	Re: 305 stocker heads get ahold of chuck porter,,,,I have a complete josey 305 with heads still bolted on,,,,its a LEGAL 85 motor ,,,it was last run about 5 years ago and went .80 under,,,,,,,,,he might want to sell it and you can pick it up at my house here in VA.....it has the 416`s on it......motor is complete minus intake tim

08-20-2007, 09:49 AM	#7
tgriffith Member Join Date: May 2002 Posts: 187 Likes: 0 Liked 0 Times in 0 Posts	Re: 305 stocker heads its a flat top 85 motor,,,,I`ll find chucks number today

08-20-2007, 09:52 AM	#8
tgriffith Member Join Date: May 2002 Posts: 187 Likes: 0 Liked 0 Times in 0 Posts	Re: 305 stocker heads I just checked,,,,,,55 cc`s for dish or flat top,,,,