Kilgore trans, coan converters, misc parts

KG-CMF · 01-08-2017, 07:38 PM

-John Kilgore th400 2.33/ 1.48, greiner valve body- p-r/n-1-2-3-n, moroso pan w/ heater, csr sheild, turbo spline 35 runs since freshening. $3000.

-Coan 7 inch- txb2817d,turbo spline, approx 30 runs, stalled around 9000 324 cu.in. Engine- $650
-coan 7 inch- tx3017d,turbo spline, approx 5 runs,stalled around 8800 324 cu.in. Engine- $500
both converters used only on above trans, converters and trans where purchased new.

-TH400 Deep cast aluminum pan- $60
- 8 NEW- PSI, DR1250 valve springs, 3 are ML series $100
- 8 USED jesel .937 body/ .850 roller wheel/ .150 keyway, straight lifter- $200
- 8 USED jesel .937 body/ .850 roller wheel/ .150 keyway, .050 offset lifter- $200
- USED approx. 35 runs MGP rods 5.56 x .927 pin x 1.88- $150
- FELPRO 1641 metal/rubber cork splayed valve cover gasket
- Mr.G 104 splayed intake-

all prices negotiable
kgotie@twcny.rr.com - 3155421195

01-08-2017, 07:38 PM	#1
KG-CMF Junior Member Join Date: Feb 2008 Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	Kilgore trans, coan converters, misc parts -John Kilgore th400 2.33/ 1.48, greiner valve body- p-r/n-1-2-3-n, moroso pan w/ heater, csr sheild, turbo spline 35 runs since freshening. $3000. -Coan 7 inch- txb2817d,turbo spline, approx 30 runs, stalled around 9000 324 cu.in. Engine- $650 -coan 7 inch- tx3017d,turbo spline, approx 5 runs,stalled around 8800 324 cu.in. Engine- $500 both converters used only on above trans, converters and trans where purchased new. -TH400 Deep cast aluminum pan- $60 - 8 NEW- PSI, DR1250 valve springs, 3 are ML series $100 - 8 USED jesel .937 body/ .850 roller wheel/ .150 keyway, straight lifter- $200 - 8 USED jesel .937 body/ .850 roller wheel/ .150 keyway, .050 offset lifter- $200 - USED approx. 35 runs MGP rods 5.56 x .927 pin x 1.88- $150 - FELPRO 1641 metal/rubber cork splayed valve cover gasket - Mr.G 104 splayed intake- all prices negotiable kgotie@twcny.rr.com - 3155421195 __________________ Kevin Gotie