|
08-27-2014, 08:28 AM | #1 |
Senior Member
Join Date: Feb 2009
Posts: 934
Likes: 358
Liked 167 Times in 77 Posts
|
leaky heads studs/nuts
couple slightly seeping @ the nut. any remedies?... please/thankyou.
Last edited by richie 2; 08-27-2014 at 09:18 AM. |
08-27-2014, 09:35 AM | #2 |
Member
Join Date: Sep 2009
Location: Dresden On. Canada
Posts: 460
Likes: 0
Liked 0 Times in 0 Posts
|
Re: leaky heads studs/nuts
http://classracer.com/classforum/sho...ing+head+studs This should help. ---Trevor
|
08-27-2014, 09:36 AM | #3 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,998
Likes: 693
Liked 1,469 Times in 549 Posts
|
Re: leaky heads studs/nuts
|
08-27-2014, 02:00 PM | #4 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,017
Likes: 57
Liked 321 Times in 101 Posts
|
Re: leaky heads studs/nuts
We always used the GM brown sealer in the can with the applicator attached to the cap....
It looked like Permatex Aviation Form-A-Gasket only thicker..... Nasty stuff but it worked great on studs and bolts.......... Bob PS: Don't forget to add a good block sealer such as Moroso Ceramic Block Sealer or K & W Metallic Block Sealer
__________________
Bob Mulry 7516 STK A & M Motorsports Last edited by Bob Mulry; 08-27-2014 at 02:04 PM. Reason: add PS |
08-27-2014, 07:49 PM | #5 |
Member
Join Date: Nov 2005
Location: Waldorf Md
Posts: 225
Likes: 10
Liked 29 Times in 16 Posts
|
Re: leaky heads studs/nuts
Richie,
Always found that on studs it helps to actually put some of the sealer in the threaded hole first. Not sure why it works, never do it with bolts ? If you are fixing it without pulling the head, pull the stud completely out, get some sealer down in the hole with a screwdriver or something and then thread the stud back in.
__________________
Bill Koustenis |
|
|