FS: 87-93 5.0 SBF Stocker Motor & Engine Management System

Notch1320 · 01-24-2013, 09:28 PM

311ci SBF Intake To Pan With Everything Below Included: $6000
.060 J&E Pistons With Coated Skirts (#141602)
.013 Offset Ground Crank (Polished)
ATI Super Dampner
ATI Timing Pointer
Eagle Rods
Coated Bearings
Ishiharra-Johnson Teflon Crank Scrapper
Canton Stock Eliminator Oil Pan
Melling Oil Pump
ARP Oil Pump Drive
ARP Bolts On Everything
Double Roller Timing Set
Custom Low Tension Rings From Greg Luneac & Chris Hardy @ RET ($470)
Bullet Billet Cam
Smith Brothers .080 Wall Pushrods
Roller Rockers From Alex @ Moneymaker Racing
Cliff Sherman Lifters
Manley Valves
Comp 999 Springs With Inner Removed
(RET) Chris Hardy Prepped E7 Heads http://www.racingenginetechnologies.com/
Kooks Stainless Step Headers, 1 5/8 x 1 3/4 x 3", w/ Spike Collectors
Ford Motorsport 24lbs Injectors
BBRC Aluminum Fuel Rails
CSR Elect. Water Pump
CSR Water Neck
CSR Billet Distributor Hold Down
Stock Distributor
Taylor Pro 409 Race Wires
HP Motorsports Solid Motor Mounts
Roush Alternator Mount & Crank Pulley
1 Wire Alternator
Stock Air Box Assembly With K&N Panel Filter
95 GT Starter
Engine was Freshened & Assembled By Daves Engine Machine
37530 Enterprise Court Newark, CA 94560
(510) 797-9536 (Angie & Dave)

Less than 50 passes @ K/S weight in a 88 Mustang Coupe, (215HP). 11.79 @ 111

Changing classes, so this needs to go!

I also have the Accel Engine Management System For Sale:

Accel GEN 7 DFI - $1100
For SBF (302) With Harness & All Sensors
Accel Single Channel Data Logger
Sportsman Key
Pro Key

Engine must sell bfeore the engine management system can go.

E-mail for questions @ Notch1320@yahoo.com

01-24-2013, 09:28 PM	#1
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	FS: 87-93 Mustang 5.0 SBF Stocker Motor & Engine Management 311ci SBF Intake To Pan With Everything Below Included: $6000 .060 J&E Pistons With Coated Skirts (#141602) .013 Offset Ground Crank (Polished) ATI Super Dampner ATI Timing Pointer Eagle Rods Coated Bearings Ishiharra-Johnson Teflon Crank Scrapper Canton Stock Eliminator Oil Pan Melling Oil Pump ARP Oil Pump Drive ARP Bolts On Everything Double Roller Timing Set Custom Low Tension Rings From Greg Luneac & Chris Hardy @ RET ($470) Bullet Billet Cam Smith Brothers .080 Wall Pushrods Roller Rockers From Alex @ Moneymaker Racing Cliff Sherman Lifters Manley Valves Comp 999 Springs With Inner Removed (RET) Chris Hardy Prepped E7 Heads http://www.racingenginetechnologies.com/ Kooks Stainless Step Headers, 1 5/8 x 1 3/4 x 3", w/ Spike Collectors Ford Motorsport 24lbs Injectors BBRC Aluminum Fuel Rails CSR Elect. Water Pump CSR Water Neck CSR Billet Distributor Hold Down Stock Distributor Taylor Pro 409 Race Wires HP Motorsports Solid Motor Mounts Roush Alternator Mount & Crank Pulley 1 Wire Alternator Stock Air Box Assembly With K&N Panel Filter 95 GT Starter Engine was Freshened & Assembled By Daves Engine Machine 37530 Enterprise Court Newark, CA 94560 (510) 797-9536 (Angie & Dave) Less than 50 passes @ K/S weight in a 88 Mustang Coupe, (215HP). 11.79 @ 111 Changing classes, so this needs to go! I also have the Accel Engine Management System For Sale: Accel GEN 7 DFI - $1100 For SBF (302) With Harness & All Sensors Accel Single Channel Data Logger Sportsman Key Pro Key Engine must sell bfeore the engine management system can go. E-mail for questions @ Notch1320@yahoo.com __________________ Shawn Allsup K/S 718 Last edited by Notch1320; 02-03-2013 at 10:28 PM.