Schubeck Lifters

jdfpam · 04-19-2007, 02:45 PM

Well, not Schubecks legally anymore, however the same product, produced in the same way, by the same person who did them for the last ten years, is now available on a very limited basis. These lifters going to be sold under a different name, mostly through set up dealers only. We did a buy in September 2006, for 10 sets. I just received the remainder of my order. 50% of it has been sent out or is already in running engines.
I don't mean to try to sell on here, I just know that these lifters were the talk of this board over the winter, and I wanted to let people know that they are now available.
If anyone needs any of these lifters, please give me a call at the below number 8-5 M-F EST. I also have two sets on EBAY this week. Please don't call looking for a phone number to call, because I won't give it to you. Joe is out of the picture, and Bob doesn't really want to deal with the negative backlash or general public, at least for now. All that I can say is that this race flat and hydraulic lifter business has changed hands from Joe to his former general manager and that he looks to improve on the original design and the questionable business practices that we had became accustomed to. I have seen 10 sets and am happy with what I have received. Call or email with any questions.

Jeff Day
Precision Automotive Machine, INC
Canton, Ohio
(330)456-3045

mike raddish · 04-19-2007, 11:16 PM

Jeff: Are you and Harley going to Beech Bend?? Mike

jdfpam · 04-20-2007, 01:08 PM

Mike,
No, we can't make it. You will have to take all of the money!

JEFF

PS. We are going to go to Toni's race next weekend in Columbus.

jdfpam · 04-24-2007, 08:02 AM

We now have one new set of Chevy hydraulics, NHRA stocker style lifter, in stock and ready to ship. They are currently on Ebay.

Jeff

(330)456-3045

STK4340 · 04-24-2007, 11:38 AM

I'm looking for a few sets of schubeck hydraulic mopar lifters. Do you have any or will have any?

Bruce Noland · 04-24-2007, 11:59 AM

Jeff,

Does the new maker of theses lifters have a problem with bushed lifter bores? Schubeck used to tell racers that he would not stand behind his lifters if the racer had bushed lifter bores. I use Schubeck lifters and have bushed lifter bores. I have never had a problem. Do you know why he had a complaint about bushed lifter bores?

Daran Summerton · 04-24-2007, 12:17 PM

Bushed lifter bores in Stock ????

Really ????

Daran - Tina
2057 SS/MA
2050 K/SA

GENE BUELL · 04-24-2007, 01:05 PM

Jeff,
are you sure Joe is out of the picture?

Gene Buell
West coast distributor, Schubeck lifters.

7426 ?/S? Well, it's still a stocker! No guts, no glory!

jdfpam · 04-24-2007, 01:28 PM

I have one set of sb mopar hydraulics on order, however they are paid for already. If you need any, please call me at (330) 456-3045.

I have not heard of any problem with bushed lifter bores, I know at least two cars running bushed lifter bores and Schubecks, with no problems for years.

As far as Joe, I guess that was/is my assumption, maybe not fact. I really don't know the whole behind the scenes story. I really have had no contact with him for a couple of months since he turned me over to Bob. Things have gone much smoother since that happened.

JEFF

Bruce Noland · 04-24-2007, 03:32 PM

Jeff,

I have not heard of any problems with the lifter bores either. At one time, Joe was telling racers that the problem was their bushed lifter bores and not his broken lifters. Huh? The new maker of these lifters should tell us up front if he has a problem with bushed lifter bores.

04-19-2007, 02:45 PM	#1
jdfpam Member Join Date: Oct 2006 Location: Ohio Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	Schubeck Lifters Well, not Schubecks legally anymore, however the same product, produced in the same way, by the same person who did them for the last ten years, is now available on a very limited basis. These lifters going to be sold under a different name, mostly through set up dealers only. We did a buy in September 2006, for 10 sets. I just received the remainder of my order. 50% of it has been sent out or is already in running engines. I don't mean to try to sell on here, I just know that these lifters were the talk of this board over the winter, and I wanted to let people know that they are now available. If anyone needs any of these lifters, please give me a call at the below number 8-5 M-F EST. I also have two sets on EBAY this week. Please don't call looking for a phone number to call, because I won't give it to you. Joe is out of the picture, and Bob doesn't really want to deal with the negative backlash or general public, at least for now. All that I can say is that this race flat and hydraulic lifter business has changed hands from Joe to his former general manager and that he looks to improve on the original design and the questionable business practices that we had became accustomed to. I have seen 10 sets and am happy with what I have received. Call or email with any questions. Jeff Day Precision Automotive Machine, INC Canton, Ohio (330)456-3045

04-24-2007, 11:59 AM	#6
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Jeff, Does the new maker of theses lifters have a problem with bushed lifter bores? Schubeck used to tell racers that he would not stand behind his lifters if the racer had bushed lifter bores. I use Schubeck lifters and have bushed lifter bores. I have never had a problem. Do you know why he had a complaint about bushed lifter bores? __________________ Bruce Noland 1788 STK

04-24-2007, 12:17 PM	#7
Daran Summerton Senior Member Join Date: Jun 2003 Location: Las Vegas nv Posts: 600 Likes: 18 Liked 66 Times in 37 Posts	Bushed lifter bores in Stock ???? Really ???? Daran - Tina 2057 SS/MA 2050 K/SA __________________ 72 cutlass

04-24-2007, 01:05 PM	#8
GENE BUELL Junior Member Join Date: Feb 2002 Location: Hesperia, Ca. Posts: 19 Likes: 0 Liked 0 Times in 0 Posts	Jeff, are you sure Joe is out of the picture? Gene Buell West coast distributor, Schubeck lifters. 7426 ?/S? Well, it's still a stocker! No guts, no glory! __________________ Gene Buell 7426 STK Gone Jeepin'!

04-24-2007, 03:32 PM	#10
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Jeff, I have not heard of any problems with the lifter bores either. At one time, Joe was telling racers that the problem was their bushed lifter bores and not his broken lifters. Huh? The new maker of these lifters should tell us up front if he has a problem with bushed lifter bores. __________________ Bruce Noland 1788 STK

04-19-2007, 11:16 PM	#2
mike raddish Junior Member Join Date: May 2006 Location: mogadore Posts: 43 Likes: 0 Liked 0 Times in 0 Posts	Jeff: Are you and Harley going to Beech Bend?? Mike

04-20-2007, 01:08 PM	#3
jdfpam Member Join Date: Oct 2006 Location: Ohio Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	Mike, No, we can't make it. You will have to take all of the money! JEFF PS. We are going to go to Toni's race next weekend in Columbus.

04-24-2007, 08:02 AM	#4
jdfpam Member Join Date: Oct 2006 Location: Ohio Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	We now have one new set of Chevy hydraulics, NHRA stocker style lifter, in stock and ready to ship. They are currently on Ebay. Jeff (330)456-3045

04-24-2007, 11:38 AM	#5
STK4340 Junior Member Join Date: Oct 2004 Location: Vacherie, LA Posts: 63 Likes: 0 Liked 0 Times in 0 Posts	I'm looking for a few sets of schubeck hydraulic mopar lifters. Do you have any or will have any?

04-24-2007, 01:28 PM	#9
jdfpam Member Join Date: Oct 2006 Location: Ohio Posts: 186 Likes: 0 Liked 0 Times in 0 Posts	I have one set of sb mopar hydraulics on order, however they are paid for already. If you need any, please call me at (330) 456-3045. I have not heard of any problem with bushed lifter bores, I know at least two cars running bushed lifter bores and Schubecks, with no problems for years. As far as Joe, I guess that was/is my assumption, maybe not fact. I really don't know the whole behind the scenes story. I really have had no contact with him for a couple of months since he turned me over to Bob. Things have gone much smoother since that happened. JEFF