Accusump/accumulator questions!

Nmbr1GMfan · 01-07-2021, 01:32 PM

The Dart block has an oil port above the oil filter but it's only like 3/8", is anyone using this to plumb their accumulator? I think a -10 on a sandwich adapter might be a better option but what adapter is everyone using if not the block port? The block port can be seen in this photo.

Chuck Gallagher · 01-07-2021, 02:50 PM

Todd;
Moroso sells an oil filter adapter that solves this nicely. The port you are talking about is a factory machining drill access.

Keith 944 · 01-07-2021, 02:54 PM

Look up canton products they make a nice one

Nmbr1GMfan · 01-07-2021, 03:41 PM

I was guessing something like this...
https://www.jegs.com/i/Moroso/710/23691/10002/-1

brett3533 · 01-07-2021, 04:41 PM

My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator

Chuck Gallagher · 01-07-2021, 06:59 PM

Todd;
Depending on which filter you use, I was thinking of the Moroso P/N 23675 or 23676 adapter. If he is still working, I'd give Howard Marcelus a call at Moroso.
Brett McFarland may have an answer also since he is familiar with the Dart BBC.

Nmbr1GMfan · 01-07-2021, 11:49 PM

Quote:

Originally Posted by brett3533

My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator

Brett, My small block doesn't have that.

curtis reed · 01-08-2021, 09:12 AM

Quote:

Originally Posted by Nmbr1GMfan

I was guessing something like this...
https://www.jegs.com/i/Moroso/710/23691/10002/-1

They changed the design a little but that is what I have been using for years with mine.

Nmbr1GMfan · 01-08-2021, 09:46 AM

Quote:

Originally Posted by curtis reed

They changed the design a little but that is what I have been using for years with mine.

Thanks Curtis.

01-07-2021, 01:32 PM	#1
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Accusump/accumulator questions! The Dart block has an oil port above the oil filter but it's only like 3/8", is anyone using this to plumb their accumulator? I think a -10 on a sandwich adapter might be a better option but what adapter is everyone using if not the block port? The block port can be seen in this photo. __________________ Todd Greene

01-07-2021, 02:50 PM	#2
Chuck Gallagher Junior Member Join Date: Apr 2013 Location: NC (nothing compares) Posts: 48 Likes: 33 Liked 134 Times in 28 Posts	Re: Accusump/accumulator questions! Todd; Moroso sells an oil filter adapter that solves this nicely. The port you are talking about is a factory machining drill access. Last edited by Chuck Gallagher; 01-07-2021 at 02:53 PM.

01-07-2021, 02:54 PM	#3
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,193 Likes: 1,161 Liked 1,877 Times in 577 Posts	Re: Accusump/accumulator questions! Look up canton products they make a nice one __________________ KEITH MAYERS 2-1/2 X somebody Still many X nobody

01-07-2021, 03:41 PM	#4
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: Accusump/accumulator questions! I was guessing something like this... https://www.jegs.com/i/Moroso/710/23691/10002/-1 __________________ Todd Greene

01-07-2021, 04:41 PM	#5
brett3533 Member Join Date: Jan 2007 Location: maysville Posts: 120 Likes: 15 Liked 46 Times in 14 Posts	Re: Accusump/accumulator questions! My BBC dart block has a oil galley access at the top of the block in the rear to plumb an accumulator __________________ Brett McFarland A/S

01-07-2021, 06:59 PM	#6
Chuck Gallagher Junior Member Join Date: Apr 2013 Location: NC (nothing compares) Posts: 48 Likes: 33 Liked 134 Times in 28 Posts	Re: Accusump/accumulator questions! Todd; Depending on which filter you use, I was thinking of the Moroso P/N 23675 or 23676 adapter. If he is still working, I'd give Howard Marcelus a call at Moroso. Brett McFarland may have an answer also since he is familiar with the Dart BBC.