Ultimate II Tach

Ed Carpenter · 12-17-2008, 05:54 PM

I need to talk to someone who is running this tach with a 4 speed. Thanks. Ed

Scotty D · 12-17-2008, 08:59 PM

hey ed you can try this site www.umtrdragrace.com go to the chat room and register in and go to the tech section there is a thread about that tach on there right now.this is a web site for manual transmission race cars.

69Cobra · 12-17-2008, 09:34 PM

I've been running that tach for about 5 years now so I might be able to help. What's your question?

Ed Carpenter · 12-18-2008, 05:39 AM

I was told you can either use magnets or a collar for the driveshaft sensor. What do you use and how do you mount the collar? Thanks. Ed

ss3011 · 12-18-2008, 08:38 AM

If you have a 9" Ford, Mark Williams has a neat kit that bolts to the rearend. Works great !

69Cobra · 12-18-2008, 01:32 PM

It comes with the earth magnets that you can JB weld to the u-joint caps. I've learned that the only problem is if you bust a u-joint their gone. I use a 2 piece collar that clamps around the pinion yoke. If memory servers me right I bought it from Strange. Hope that helps.

Geddes · 12-18-2008, 04:46 PM

Call Steve at Jerry Bickel Race Cars.

They sell the collar and "L" bracket to mount the sensor, etc.

8000 rpm and JB Weld is scarey...........

Ed Carpenter · 12-19-2008, 02:01 AM

Thanks guys I called Bickel and ordered the collar and bracket. Ed

12-17-2008, 05:54 PM	#1
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Ultimate II Tach I need to talk to someone who is running this tach with a 4 speed. Thanks. Ed __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

12-17-2008, 08:59 PM	#2
Scotty D Member Join Date: Nov 2007 Posts: 139 Likes: 0 Liked 0 Times in 0 Posts	Re: Ultimate II Tach hey ed you can try this site www.umtrdragrace.com go to the chat room and register in and go to the tech section there is a thread about that tach on there right now.this is a web site for manual transmission race cars.

12-17-2008, 09:34 PM	#3
69Cobra Senior Member Join Date: Aug 2007 Location: California, Ky Posts: 669 Likes: 61 Liked 2 Times in 2 Posts	Re: Ultimate II Tach I've been running that tach for about 5 years now so I might be able to help. What's your question? __________________ Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032

12-18-2008, 05:39 AM	#4
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Ultimate II Tach I was told you can either use magnets or a collar for the driveshaft sensor. What do you use and how do you mount the collar? Thanks. Ed __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

12-18-2008, 08:38 AM	#5
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 909 Likes: 70 Liked 239 Times in 114 Posts	Re: Ultimate II Tach If you have a 9" Ford, Mark Williams has a neat kit that bolts to the rearend. Works great !

12-18-2008, 01:32 PM	#6
69Cobra Senior Member Join Date: Aug 2007 Location: California, Ky Posts: 669 Likes: 61 Liked 2 Times in 2 Posts	Re: Ultimate II Tach It comes with the earth magnets that you can JB weld to the u-joint caps. I've learned that the only problem is if you bust a u-joint their gone. I use a 2 piece collar that clamps around the pinion yoke. If memory servers me right I bought it from Strange. Hope that helps. __________________ Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032

12-18-2008, 04:46 PM	#7
Geddes Junior Member Join Date: Feb 2007 Location: Barnesville, Ohio Posts: 91 Likes: 0 Liked 0 Times in 0 Posts	Re: Ultimate II Tach Call Steve at Jerry Bickel Race Cars. They sell the collar and "L" bracket to mount the sensor, etc. 8000 rpm and JB Weld is scarey...........

12-19-2008, 02:01 AM	#8
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Ultimate II Tach Thanks guys I called Bickel and ordered the collar and bracket. Ed __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development