Bleeding a hyd clutch

superdiv1 · 05-10-2007, 01:48 AM

this is gonna sound crazy but it works.
you need to take the air hose from your compressor and put the blow end on it, open the cap and cover it with your hand while putting just a smidge of air into the system pushing the fluid down to the slave cyl. and have some one else pump the clutch as fast as they can. it sounds lik the worst idea ever but it works. did the same thing on a bunch of s-10's and never had a problem. hope it helps.

-Tony

05-10-2007, 01:48 AM	#5
superdiv1 Banned Join Date: Dec 2004 Location: hatboro Posts: 17 Likes: 0 Liked 0 Times in 0 Posts	this is gonna sound crazy but it works. you need to take the air hose from your compressor and put the blow end on it, open the cap and cover it with your hand while putting just a smidge of air into the system pushing the fluid down to the slave cyl. and have some one else pump the clutch as fast as they can. it sounds lik the worst idea ever but it works. did the same thing on a bunch of s-10's and never had a problem. hope it helps. -Tony