Small runner intake gaskets

prostockpete1 · 01-16-2025, 01:02 AM

Mr. Gasket offers sheets of intake gasket material ... Holley / Mr . gasket site shows # 77B & 77C part # .s

Ed McLawhorn Jr. · 01-16-2025, 12:22 PM

Thanks everyone. I?m looking at some sce gaskets. Not sure if they will fit the bill, time will tell. Worse case, I will buy gasket sheet and cut to fit. Hoping there was another option.

Dirk Olson · 01-16-2025, 02:28 PM

Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it.

Ed I talked to Lance Line this past weekend and he said that you give him call he should have what you need at Line Performance in Wright Minn.

Dirk

Ed McLawhorn Jr. · 01-16-2025, 03:31 PM

Quote:

Originally Posted by Dirk Olson

Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it.

Dirk

Thanks Dirk. I had a friend call this afternoon and suggested same thing. That?s what he ended up doing.

shoebox racer · 01-18-2025, 09:21 PM

I might have something for you, I sent a private message with my phone number.

Mike Parmenter

Kevin Panzino · 01-24-2025, 09:51 AM

Ditto on cometic cutting a gasket for you with your own part number.
Matches perfectly if you do your homework and send either a detailed cad drawing or a perfect template.
However, unless anything has changed I wasn?t at all happy with the gasket material they use. It?s quite hard and doesn?t compress very well. Given that there is normally a slight variation in the angle between head and manifold no matter how careful you are with your angle mill calcs, measurements and execution you can wind up with coolant weepers down into the galley you won?t see. Plenty or rtv around the coolant passages is a must!

Kp

Jrh5220 · 01-25-2025, 06:20 PM

You can make your own with 1290 fel pro.

STK1217 · 01-27-2025, 07:30 PM

MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ?

01-16-2025, 01:02 AM	#1
prostockpete1 Member Join Date: Mar 2012 Posts: 255 Likes: 3 Liked 90 Times in 52 Posts	Re: Small runner intake gaskets Mr. Gasket offers sheets of intake gasket material ... Holley / Mr . gasket site shows # 77B & 77C part # .s

01-16-2025, 12:22 PM	#2
Ed McLawhorn Jr. Member Join Date: Nov 2008 Posts: 306 Likes: 3 Liked 19 Times in 17 Posts	Re: Small port intake gaskets Thanks everyone. I?m looking at some sce gaskets. Not sure if they will fit the bill, time will tell. Worse case, I will buy gasket sheet and cut to fit. Hoping there was another option.

01-16-2025, 02:28 PM	#3
Dirk Olson Member Join Date: Mar 2003 Posts: 199 Likes: 50 Liked 172 Times in 46 Posts	Re: Small runner intake gaskets Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it. Ed I talked to Lance Line this past weekend and he said that you give him call he should have what you need at Line Performance in Wright Minn. Dirk __________________ Dirk Olson 5036 STK Last edited by Dirk Olson; 01-20-2025 at 02:51 PM. Reason: more information

01-18-2025, 09:21 PM	#5
shoebox racer Junior Member Join Date: Aug 2004 Posts: 12 Likes: 2 Liked 2 Times in 2 Posts	Re: Small runner intake gaskets I might have something for you, I sent a private message with my phone number. Mike Parmenter

01-24-2025, 09:51 AM	#6
Kevin Panzino Senior Member Join Date: Oct 2002 Location: Pittsburgh Posts: 575 Likes: 298 Liked 747 Times in 136 Posts	Re: Small runner intake gaskets Ditto on cometic cutting a gasket for you with your own part number. Matches perfectly if you do your homework and send either a detailed cad drawing or a perfect template. However, unless anything has changed I wasn?t at all happy with the gasket material they use. It?s quite hard and doesn?t compress very well. Given that there is normally a slight variation in the angle between head and manifold no matter how careful you are with your angle mill calcs, measurements and execution you can wind up with coolant weepers down into the galley you won?t see. Plenty or rtv around the coolant passages is a must! Kp

01-25-2025, 06:20 PM	#7
Jrh5220 Member Join Date: Dec 2021 Location: Pukwana SD Posts: 120 Likes: 492 Liked 28 Times in 17 Posts	Re: Small runner intake gaskets You can make your own with 1290 fel pro.

01-27-2025, 07:30 PM	#8
STK1217 Member Join Date: Nov 2006 Posts: 137 Likes: 48 Liked 10 Times in 7 Posts	Re: Small runner intake gaskets MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ? Last edited by STK1217; 01-27-2025 at 07:32 PM. Reason: size of port