Eric Weingartner LS Cam Challenge

[Alan Roehrich]

I currently plan to attend PRI. I missed the first one in nearly 30 years in 2022, while I was recovering. Don't intend to miss any for a long time. I plan to sit in on several seminars, they're often quite good.

[Stan Weiss]

Originally Posted by Stan Weiss

How did each of the cams that were tested with the different heads, intake manifold, headers, and increased CR do?


Stan

As a followup. I find it interesting how at around 4900 RPM almost all of these have the torques come so close together.



Stan

[Stan Weiss]

Average Cam Specs for Eric's Top 5 Finishers
LCA 110.5- Adv 3.8 - ICL 106.7 - ECL 114.3 - Intake 0.050" 239.46 - Exhaust 0.050" 254.20 - IVO 13.50 - IVC 45.96 - EVO 61.84 - EVC 12.30 - Overlap 25.80 - Intake Lift 0.642" - Exhaust Lift 0.640"


Average Cam Specs for My Top 5 Finishers - I used a different method of scoring
I have 4 of Eric Top 5 in My Top 5. One of his top 5 doesn't make my Top 5 and someone outside his Top 5 moved into My Top 5
LCA 109.7 - Adv 3.0 - ICL 106.7 - ECL 112.7 - Intake 0.050" 241.86 - Exhaust 0.050" 254.60 - IVO 14.64 - IVC 47.22 - EVO 60.38 - EVC 14.16 - Overlap 28.80 - Intake Lift 0.646" - Exhaust Lift 0.644"

Stan

[Stan Weiss]

This was at PRI. While it is about Eric's Cam Challenge. There is some good general engine / cam information discussed.



Stan

[Stan Weiss]

Near the end of this video Eric shows the results of testing the Victor, Victor Jr and the Holley Split ported by Charlie Servedio. Using the Brodix BR3 heads and the Texas Speed cam.



Stan