ET with and without wheelie.

[tommy d]

NARCISSIST. Look it up.That is all.

[1320racer]

Originally Posted by tommy d

NARCISSIST. Look it up.That is all.

claims to be involved in drag racing for 40 years

Originally Posted by tommy d

Could switching from a 12 bolt with a light spool to the Ford be 6-8 slower?

and still CLUELESS!!

[tommy d]

Originally Posted by 1320racer

claims to be involved in drag racing for 40 years


and still CLUELESS!!

Not about the narcissist comment. I was married to one for 50 years. I know the signs. Why would you think I'm talking about you anyway? Have you been called one before? Seem a little defensive?

[1320racer]

you're balless too

[Stan Weiss]

Let look at a car that has a frontal area of 25 sq ft and runs 12.0 @ 113.14, 60 Foot ET = 1.7851 - MPH = 40.09

If the wheel stand cause the frontal area to increase to 50 sq ft (doubles), but you can't use any added wheel thrust then 60 Foot ET = 1.7872 - MPH = 39.98 MPH

Stan


PS Let add that the 1.7851 60 foot number is with 12 inches of rollout. With 6 inches of rollout the 60 foot time would be 1.8532

[tommy d]

Originally Posted by 1320racer

you're balless too

Also a trait. Insults if disagreed with. Hmmm.

[1320racer]

At least you recognize what you did and why

[nickh]

Hey guys there is incredible amount of experience on this page. Please respect one another, if you need to talk smack to each other do it on private message or better yet call each other on the phone and you can let it rip and get it out of your system.

The only other thing to do is get a swimming pool fill it with mud and water and you guys can take it out on each other in muddy water, aka mud wrestling.

And one more thing understand that manufacturers also visit this site as well.

[1700camaro]

Good luck on your wishes nickh! I don't see it happening.

Tommy d, KNOWS!