HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock
Register Photo Gallery FAQ Community Calendar

Reply
 
Thread Tools Display Modes
Old 01-28-2024, 03:09 PM   #1
jmantle
Member
 
Join Date: Feb 2008
Location: Black Creek, BC Canada
Posts: 331
Likes: 79
Liked 172 Times in 81 Posts
Default Re: Ways to check on the use of illegal devices

Quote:
Originally Posted by Don Kennedy View Post
FYI Just a few ways
,plus by the way lock up convertors are Being used which are illegal,
Don, curious by what you meant by this as most late 70's cars and newer were available with a lockup converter.

." Lockup converter permitted if
OEM-equipped with lockup converter and OEM transmission
is used."
__________________
Jim Mantle U/V/SA 6632
jmantle is offline   Reply With Quote
Old 01-28-2024, 05:46 PM   #2
tstickff
Member
 
tstickff's Avatar
 
Join Date: Mar 2009
Posts: 469
Likes: 308
Liked 561 Times in 138 Posts
Default Re: Ways to check on the use of illegal devices

What’s the purpose of having a cell phone 3 feet behind the rear tail lens every pass? Asking for a friend.

Tim stickles
__________________
Tim Stickles
tstickff is offline   Reply With Quote
Liked
Old 01-28-2024, 06:06 PM   #3
Cglrcng
Member
 
Cglrcng's Avatar
 
Join Date: Aug 2023
Location: Kingman, AZ
Posts: 410
Likes: 1,587
Liked 334 Times in 185 Posts
Default Re: Ways to check on the use of illegal devices

After having just mentored High School FIRST Robotics for well over a decade (both FRC 150 lb robots and FTC 18" cubed approx 40 lb robots), and being an IT Tech w/ more than 2 decades of experience in computer building, repair and diagnosing, and 3 college educated sons who are networking artists (1 -the oldest of which actually travelled the world, not once but twice for Global Crossing helping to actually set up originally the networking backbone worldwide (he installed the switches that the backbone operates over, not once, but twice...the first time to establish the original backbone, then years later to miniaturize those switches when smaller packages were available to save space, reduce wiring, reduce heat, etc, and upgraded it again), why hire new, when you can use the guys that did it originally, nobody knew the true backbone like the original installers.

Anyway, he is now an FTA (Feild Technical Advisor), for FIRST out of New Hampshire, the FRC and FTC Robots are all run on a specially designed and engineered secured wireless network, and all are connected worldwide from field in an event arena, high school gym, or major convention center, etc. (where maybe worldwide up to 25-45 different events), are run over a 3-5 day event period simultaneously from as many locations across the planet with teams that number in the 5,000 teams registered a year, from over 171 countries (the 150 lb FRC robots are playing a task based game, and a different game each year.

The actual whole thing is a technical Engineering Nightmare (disguised as a game only to keep high school students interested), in Steam (Science, Technology, Engineering, Arts, and Math) and prepare them for careers in corporations and industry properly.

Over that period I have seen and we have used and seen a million electronic items in packages so small and light, both used on and off robot, some wireless, some wired, that you would find most extremely hard to detect if used on a vehicle the size of ours we compete with.

As everything must fit within a much smaller package (Just visit AndyMark.com for proof and imagine the millions of possibilities of crossbreeding usages of many of those robot parts available to the robotics community, then multiply by thousands to millions of worldwide sellers, and available parts suppliers...hey I am not encouraging anyone to actually do anything here, just showing the auto speed parts industry is not the only industry to look to when looking for all the possibilities out there you would need to look for), than those we compete with (much larger vehicles), weight to an FRC robot is usually limited to 150 lbs max, so everything that goes into the design of that specific task bot is weighed, not to the pound but to the Oz or 10th of an Oz or even less, constantly documented, and the scales are more accurate that are used in competitions because they are smaller and easier to calibrate, and you are extremely mindful of everything that goes into it, and the rulebook is in even finer detail, and as lengthy as ours (usually 165-175 pages), with only 1 major difference...Our NHRA Section 11 is specific (paraphrased here only......"if it is listed as allowed you may use it, if it is prohibited you may not, but if it is not listed as allowed...ask first." Wherein the FIRST program inspires and encourages "Thinking Outside The Box" type innovation, thinking and doing...Unless it is specifically prohibited by the rules, you are perfectly free to do whatever you like, own it, share it, hide it, use it! Breaking the rules is prohibited, but if the rules do not prohibit something break the rules of science and phyisics itself if you can, and yes, I have seen some unbelievable, absolutely impossible tasks performed at speeds I never thought were possible by a wireless toy.

However, as in NHRA Drag Racing, and FIRST Robotics alike Cheating is discouraged, and highly frowned upon, and if caught both penalize highly for it. In FIRST just like NHRA, there are always going to be cheaters, just like there is in everything in the world.

But, a simple Wire Shark software program and a laptop to run it on will not only locate every single secured or unsecured wireless and or wired network running on, near, or within miles of a specific location where said laptop running wire shark is being run and constantly logging all the discovered networks and users (even if just used or connected for a millisecond space in time, it would be logged, and discoverable, by someone who knows how to use it properly)...I have witnessed my eldest FTA Son who was noticing momentary glitches in their secured robot arena system, he has a dedicated secure laptop just wire shark that is running hours before (a day plus actually), once we build the arena fields, until after the 3-5 day event is fully over, and was able to not only discover an illegal user tapped into the secure dedicated arena rot system, but knew in a flash the exact gps coordinates to locate the offender and was able to walk right up to an arena seat far up in the rafters and nosebleed section to a lone (very interested, and very suspicious spectator, and say hand it over please, and he secured the offending hack device), he was an active team member who thought really highly of himself, and thought he could never get caught, but he was caught red handed with a device that was intended to glitch the system intentionally, for a competitive advantage. It was super easy to see the pattern as it was only being used for, and against the final top 4 ranked teams in said event. And only to help 1 team, and against 3 others. It only disconnected certain robots by glitching the connection momentarily causing instant but lengthy indiv. rebooting.
__________________
Gary Lucier - 7832 STK. / 7832 E.T. EF/S Slow Sled. I am, but a simple test of your true patience. So, do all the really "Big Wheelies" you can!
Cglrcng is online now   Reply With Quote
Old 01-28-2024, 06:47 PM   #4
Cglrcng
Member
 
Cglrcng's Avatar
 
Join Date: Aug 2023
Location: Kingman, AZ
Posts: 410
Likes: 1,587
Liked 334 Times in 185 Posts
Default Re: Ways to check on the use of illegal devices

Warning: (Don't do it...illegal in Stock and S.S., I looked.) An FRC wheel encoder is about the circumference of a dime or smaller, and a quarter to a half inch thick, the counter ticks in the 360 degree are only separated by hundredths of an inch to a 1/6th of an inch. Forget engine RPM, or a driveshaft sensor, the real key is the wheels that stay hooked up, never leave the ground, never spin, and a sensor that measures the whole quarter mile. From start to finish down to fractions of the last inch (if the track is a full exact 1,320', and you know exactly where that begins and ends, and you can position exactly the start point.

Have I thought about it, sure, so I looked it up...not permitted. Do I have one installed? Absolutely not, but last week I was installing front end parts a 10 pc kit on my neighbors 2004 Toyota Sienna Van, and proudly right there in both front calipers (that I needed to remove to uninstall and hang up next to the caliper were 2 ABS brake sensors, about the circumference of a nickle, and 1" thick, and low and behold, they are simply wired wheel encoder magnet pickups counting the rotor vanes. A simple wheel encoder already installed on that vehicle stock.

I have no idea if that vehicle is even in the guide, but they are a part of the stock ABS brake system and could easily though illegally be used to determine actual track position accurately as long as it does not do wheelies.. lol.
__________________
Gary Lucier - 7832 STK. / 7832 E.T. EF/S Slow Sled. I am, but a simple test of your true patience. So, do all the really "Big Wheelies" you can!
Cglrcng is online now   Reply With Quote
Liked
Old 01-28-2024, 06:55 PM   #5
Cglrcng
Member
 
Cglrcng's Avatar
 
Join Date: Aug 2023
Location: Kingman, AZ
Posts: 410
Likes: 1,587
Liked 334 Times in 185 Posts
Default Re: Ways to check on the use of illegal devices

My last word on the subject...There are a million ways to cheat. And a million and a half ways to get caught..

Every FRC match played begins with a 12 to 45 second pre-programmed autonomous period, drivers behind the start line in a very difficult task based game, cannot touch the controls except the emergency stop button, our cars in a straight line could easily be raced tge same way...AI is a whole lot smarter, and faster learning too, but then we are no longer drivers, we are riders, or they simply remove us (the weak link), from the game altogether.

That is no fun.
__________________
Gary Lucier - 7832 STK. / 7832 E.T. EF/S Slow Sled. I am, but a simple test of your true patience. So, do all the really "Big Wheelies" you can!
Cglrcng is online now   Reply With Quote
Old 01-28-2024, 07:09 PM   #6
1320racer
VIP Member
 
1320racer's Avatar
 
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 759 Times in 379 Posts
Default Re: Ways to check on the use of illegal devices

everything you need is right here been in use for decades!

https://moretraction.com/

https://moretraction.com/products/drag-racing/
1320racer is offline   Reply With Quote
Old 01-29-2024, 10:39 AM   #7
Bobby DiDomenico
Senior Member
 
Join Date: Jun 2002
Posts: 924
Likes: 103
Liked 101 Times in 52 Posts
Default Re: Ways to check on the use of illegal devices

QUOTE=Cglrcng;692317]
"Have I thought about it, sure, so I looked it up...not permitted. Do I have one installed? Absolutely not, but last week I was installing front end parts a 10 pc kit on my neighbors 2004 Toyota Sienna Van, and proudly right there in both front calipers (that I needed to remove to uninstall and hang up next to the caliper were 2 ABS brake sensors, about the circumference of a nickle, and 1" thick, and low and behold, they are simply wired wheel encoder magnet pickups counting the rotor vanes. A simple wheel encoder already installed on that vehicle stock.

I have no idea if that vehicle is even in the guide, but they are a part of the stock ABS brake system and could easily though illegally be used to determine actual track position accurately as long as it does not do wheelies.. lol.[/QUOTE]

I believe Pontiac used the ABS sensor to trip the Low Tire Pressure light on our 2004 Grand Prix. If one wheel was rotating at a different speed than the other 3 the light came on.
Bobby DiDomenico is offline   Reply With Quote
Liked
Old 01-29-2024, 11:56 AM   #8
Fireofficer74
Member
 
Join Date: Mar 2021
Location: Davie, Florida
Posts: 158
Likes: 79
Liked 47 Times in 36 Posts
Default Re: Ways to check on the use of illegal devices

Do any of yeall know how traction control works?

Traction contronl does not make ones car more consistent.

Its a crutch to attempt to stop wheel spin.
Fireofficer74 is offline   Reply With Quote
Old 01-28-2024, 07:45 PM   #9
Cglrcng
Member
 
Cglrcng's Avatar
 
Join Date: Aug 2023
Location: Kingman, AZ
Posts: 410
Likes: 1,587
Liked 334 Times in 185 Posts
Default Re: Ways to check on the use of illegal devices

#2...In Robots as in many newer autos these days the CAN system is used, designed & developed by the auto industry, but perfected for the auto industry by extreme experimentation by the FIRST and other organizations by use for over 3 decades before it was actively used in the cars of today. Just plug in to any CAN system network (Star or ladder type setup), and you can in seconds discover every device in the network, or that is connected to any device that is connected to that network, wired or wireless!

But, with all that yes, go watch the Footbrake Challenge, or watch a footbrake artist at work, nothing electronic can beat trip zip green (.000) and dead on the dial. Perfect that, and you have the class racing world by the tail....Or, just go race an electronics are all allowed class, and break out that checkbook and wallet, as you will need it!

Oh yeah, did you know hacking into a secure network is a Federal Crime. Forget about breaking the FIRST Rules, you could have a lot more to worry about than your team is now disqualified, and you have 30 minutes to vacate the facility, your team loses, loses all season points, and ummm, we shall see about the other penalties on Monday!

Behind every pc of software ever written, and every pc of hardware ever built is a fallible human. Now we must fear AI will replace us soon enough. Well ,I don't personally, I am near the end of my lifecycle, so I am going to get back to hammering the tree and improving my car legally to run dead on, otherwise my left leg knows where the brake pedal is and I am watching you from the 1/8th mile marker out to that last inch from my slow moving 3 mirrored fishbowl anyway.

And cheaters never prosper, eventually many if not all will be caught, or karma will catch them. But, it is NHRA's responsibility to catch, police, & punish, & ours by the the book to protest that which we think is wrong and that comes with risks, both financially and personally, which is sometimes necessary, but should not be done (or accepted by NHRA), if done for a competitive advantage.

You could seek for decades for each avail. cheater device, and they are being invented, designed, and improved upon daily. Waste your time improving your own game, it will make you happier and less suspicious of the competitors surrounding you and make all that technology spent on moot.
__________________
Gary Lucier - 7832 STK. / 7832 E.T. EF/S Slow Sled. I am, but a simple test of your true patience. So, do all the really "Big Wheelies" you can!
Cglrcng is online now   Reply With Quote
Liked
Old 01-28-2024, 10:47 PM   #10
B/S 428
Junior Member
 
Join Date: Jan 2011
Posts: 87
Likes: 18
Liked 154 Times in 34 Posts
Default Re: Ways to check on the use of illegal devices

There's really a simple solution that has been mentioned on here before, all winners (could be) subject to teardown/inspection. I had to do this 3x at Indy before they'd give me my class win Wally. They could even go a bit further and tag the last 8 cars in the eliminator, subject to inspection. Brian Seaberg 627
B/S 428 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.