SS/GT Engine Choice

Adger Smith · 08-28-2023, 03:13 PM

Alan,
This will be a shop clean out combination.
I have blocks, heads cams and a lot of parts needed just laying around the shop.
Yes, I will have to buy pistons, but not going the exotic expensive route.
Thanks for the info.

OH, Dwight Southerland... You ask me to keep silent on that combination.
My tight Arse is still gathering parts for it.
Yes, I have a set of the 401's and a set of iron 990's that Self worked.
So the 425/435 combo and the 425/424 combo are possible.
Might be safe with the 454 just in case one combo gets treated badly byAHFS.

Thanks
Adger

08-28-2023, 03:13 PM	#7
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: SS/GT Engine Choice Alan, This will be a shop clean out combination. I have blocks, heads cams and a lot of parts needed just laying around the shop. Yes, I will have to buy pistons, but not going the exotic expensive route. Thanks for the info. OH, Dwight Southerland... You ask me to keep silent on that combination. My tight Arse is still gathering parts for it. Yes, I have a set of the 401's and a set of iron 990's that Self worked. So the 425/435 combo and the 425/424 combo are possible. Might be safe with the 454 just in case one combo gets treated badly byAHFS. Thanks Adger __________________ Adger Smith (Former SS) Last edited by Adger Smith; 08-28-2023 at 03:20 PM. Reason: add & SP