|
![]() |
#8 |
Junior Member
Join Date: Dec 2017
Posts: 56
Likes: 0
Liked 7 Times in 6 Posts
|
![]()
Very doable.
Tip: Leave your timing degrees the same, just move the curve in and out. At 5 degrees, I've observed a 10:1 ratio IE, putting timing in at 1.8 on one run and 2.5 on the other run, slowed the car 7 hunds. 7 tenths of timing was 7 hunds of ET. But that's in a very specific application. YMMV. |
![]() |
![]() |
|
|