Oil pan for LS1 stocker.

Tom Meyer · 12-18-2021, 03:04 PM

What is the best stocker pan for F body LS1. Tom

e vassar · 12-18-2021, 11:27 PM

Quote:

Originally Posted by Tom Meyer

What is the best stocker pan for F body LS1. Tom

Moroso 21149
Mike Mans has all the details.

PozQB14 · 12-19-2021, 03:38 PM

Quote:

Originally Posted by Tom Meyer

What is the best stocker pan for F body LS1. Tom

Tom contact Champ Pans out of Wisconsin. They were at PRI and will have one done for you within a week or two. We actually bought one at the show right off the display since it was so nice and Jake (I believe that was his name) gave us such a good deal. They have them in aluminum and cast.

Mike Mans · 12-20-2021, 01:41 PM

I know Champ has some nice pans for the traditional SBC engines, but I don't believe they have anything NHRA Accepted (yet) for the LS platform. I could be wrong, but I haven't seen them post anything to this point.

I worked with Moroso to get the 21149 approved as it's dimensionally very similar to the stock LS pan from GM, but they have very nice internal oil control built right into it. We were going to put baffles and stuff into a stock cast pan, but the folks at Moroso do such a nice job for the money - it was a better option for us.

PozQB14 · 12-20-2021, 08:27 PM

Quote:

Originally Posted by Mike Mans

I know Champ has some nice pans for the traditional SBC engines, but I don't believe they have anything NHRA Accepted (yet) for the LS platform. I could be wrong, but I haven't seen them post anything to this point.

I worked with Moroso to get the 21149 approved as it's dimensionally very similar to the stock LS pan from GM, but they have very nice internal oil control built right into it. We were going to put baffles and stuff into a stock cast pan, but the folks at Moroso do such a nice job for the money - it was a better option for us.

I agree moroso has a nice option for an LS F Body pan, the issue with them and stefs was availability and lead time, the one we got was for a super stock application so I guess it's different but it looked like a stock pan.

Tom Meyer · 01-02-2022, 03:53 PM

Jegs had the moroso pan in stock, got fri it is a really nice piece with oil pickup at the rear of pan a trap door and anti slosh baffle. It holds 7 qts. Now what scraper should a person use? Tom

Mike Mans · 01-03-2022, 07:05 PM

I haven't tried any of their stuff, but the products that these guys make look pretty nice.

https://www.improvedracing.com/oil-p...-scrapers.html

I would like to try one of their scrapers someday as well.

Tom Meyer · 01-03-2022, 10:25 PM

Thanks Mike, that's what we had damaged when the piston broke. Tom

12-18-2021, 03:04 PM	#1
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 351 Times in 120 Posts	Oil pan for LS1 stocker. What is the best stocker pan for F body LS1. Tom __________________ Tom Meyer 5240 SS Stock ???

12-20-2021, 01:41 PM	#4
Mike Mans Member Join Date: Jan 2006 Posts: 177 Likes: 21 Liked 299 Times in 48 Posts	Re: Oil pan for LS1 stocker. I know Champ has some nice pans for the traditional SBC engines, but I don't believe they have anything NHRA Accepted (yet) for the LS platform. I could be wrong, but I haven't seen them post anything to this point. I worked with Moroso to get the 21149 approved as it's dimensionally very similar to the stock LS pan from GM, but they have very nice internal oil control built right into it. We were going to put baffles and stuff into a stock cast pan, but the folks at Moroso do such a nice job for the money - it was a better option for us.

01-02-2022, 03:53 PM	#6
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 351 Times in 120 Posts	Re: Oil pan for LS1 stocker. Jegs had the moroso pan in stock, got fri it is a really nice piece with oil pickup at the rear of pan a trap door and anti slosh baffle. It holds 7 qts. Now what scraper should a person use? Tom __________________ Tom Meyer 5240 SS Stock ???

01-03-2022, 07:05 PM	#7
Mike Mans Member Join Date: Jan 2006 Posts: 177 Likes: 21 Liked 299 Times in 48 Posts	Re: Oil pan for LS1 stocker. I haven't tried any of their stuff, but the products that these guys make look pretty nice. https://www.improvedracing.com/oil-p...-scrapers.html I would like to try one of their scrapers someday as well.

01-03-2022, 10:25 PM	#8
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 351 Times in 120 Posts	Re: Oil pan for LS1 stocker. Thanks Mike, that's what we had damaged when the piston broke. Tom __________________ Tom Meyer 5240 SS Stock ???