HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock
Register Photo Gallery FAQ Community Calendar

Reply
 
Thread Tools Display Modes
Old 11-25-2020, 08:38 PM   #1
Keith 944
VIP Member
 
Keith 944's Avatar
 
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,160
Liked 1,877 Times in 577 Posts
Default Re: Never Be Afraid

As a youngster i decided to check the oil in the lawnmower while it was running!
lesson learned.

lesson #2
I wanted to be a car customizer, my first car a mustang II, had a dent in the quarter, so i went to pep boys bought a gallon of bondo and mixed the hardener right into the can.
__________________
KEITH MAYERS
2-1/2 X somebody
Still many X nobody
Keith 944 is offline   Reply With Quote
Old 11-25-2020, 09:33 PM   #2
Marty Knox
Member
 
Join Date: Aug 2012
Location: Freeland MI
Posts: 179
Likes: 283
Liked 44 Times in 19 Posts
Default Re: Never Be Afraid

A chain fall hung from a chain wrapped around two 2 x 4's sitting on the garage door rails won't support a 55 Chevy 235 and Powerglide.
__________________
Marty Knox 3071 STK
Marty Knox is offline   Reply With Quote
Old 11-26-2020, 03:34 PM   #3
Frank Castros
VIP Member
 
Join Date: Nov 2001
Location: The Lowcountry.
Posts: 2,975
Likes: 2,586
Liked 2,725 Times in 961 Posts
Default Re: Never Be Afraid

My cousin and I in preparation for a Mini-bike race with a neighbor thought it be good idea to replace the spark plug and oil. So we walked down to the store and bought a Champion plug but I had this brilliant idea to buy a can of STP thinking that would be the speed secret of the day. Good enough for Richard Petty, good enough for us.
So we drained the oil and replaced it with the STP.
How do you think went? Not so good as the engine failed to start until one of the older guys in the neighborhood saw the can of STP asked a few questions, called us few names and told us to drain it and refill it with oil.
We won the race and a lesson learned.
Frank Castros is offline   Reply With Quote
Old 11-26-2020, 07:50 PM   #4
Terry Cain
Senior Member
 
Terry Cain's Avatar
 
Join Date: Feb 2008
Location: Georgetown, Indiana (close to Louisville, KY)
Posts: 777
Likes: 530
Liked 231 Times in 107 Posts
Default Re: Never Be Afraid

I remember changing a motor in a very small garage in dead winter. Half car was sticking out of garage . No heat. My buddy was helping. I'm laying under car wiring up starter and he makes the smart *** comment. Why didn't you wait til tomorrow. It's suppose to be 10 degrees warmer. It was -14 when he said that. lol
__________________
Terry Cain ???? STK
tcain19689585@gmail.com
Terry Cain is offline   Reply With Quote
Old 11-27-2020, 12:07 PM   #5
1matcoman
Member
 
1matcoman's Avatar
 
Join Date: Jul 2008
Location: Houston, Texas
Posts: 341
Likes: 835
Liked 353 Times in 135 Posts
Talking Re: Never Be Afraid

Quote:
Originally Posted by Marty Knox View Post
A chain fall hung from a chain wrapped around two 2 x 4's sitting on the garage door rails won't support a 55 Chevy 235 and Powerglide.
And, how is it that you came to know this, Marty??? :-)
1matcoman is offline   Reply With Quote
Old 11-27-2020, 02:29 PM   #6
Marty Knox
Member
 
Join Date: Aug 2012
Location: Freeland MI
Posts: 179
Likes: 283
Liked 44 Times in 19 Posts
Default Re: Never Be Afraid

Quote:
Originally Posted by 1matcoman View Post
And, how is it that you came to know this, Marty??? :-)
Christmas Eve 1973 - pulling motor from my 55 Bel Air in my Mom's garage. The 2 x 4s broke, hit me on the way down and knocked me out.
I don't know how long I lay there.
__________________
Marty Knox 3071 STK
Marty Knox is offline   Reply With Quote
Old 11-27-2020, 05:16 PM   #7
Jack Matyas
Live Reporter
 
Join Date: Nov 2001
Location: Bethlehem , PA -Christmas City , USA
Posts: 4,930
Likes: 406
Liked 2,051 Times in 399 Posts
Send a message via AIM to Jack Matyas
Talking Re: Never Be Afraid

So its Summer in the mid-seventies and to me that meant Englishtown and class runoffs -something I wouldn't miss for the world .Friday afternoon I made it to the semis in class but that run had its problems for sure .Can you imagine me with a stick? Yep , I was then racing my trusty '73 Ventura with a 4 speed and during that semi run I managed to miss third gear so I put 'er in high and cruised to a win .

That night while at the campfire with friends ( yes, we camped outside ) the guys were asking what I had in mind for the class final runoff the next morning .I had nothing as a spare trans wasn't something I carried or could afford .One of them stood up and said he had the answer and soon a couple of them were gone .Three hours later they returned and unloaded a shiny four speed and announced lets get it up in the air .The next morning things went as planned and I won class .I never did find out exactly where that trans came from but they headed toward New York when they left . All the names I've left out on purpose but I'm sure none were afraid ...........
__________________
Jack Matyas 1547 FS/C 2015 Camaro COPO # 62- 2012 Camaro Convertible COPO

Last edited by Jack Matyas; 11-27-2020 at 05:21 PM.
Jack Matyas is offline   Reply With Quote
Old 11-27-2020, 06:37 PM   #8
G Schenck
Senior Member
 
Join Date: Mar 2007
Location: Harahan, La.
Posts: 521
Likes: 41
Liked 81 Times in 35 Posts
Default Re: Never Be Afraid

I have been saying for the last ten or so years, I should have been taking notes and writing about our racing encounters. Having race for 50+ years with the likes of Big Joe Teuton and the Southland group, The Thriller(my cousin),Rudy and Ross Laris, and Craig Bourgeois, I could write a novel that could give War and Peace a run for the money. Many funny **** and a few illegal.

The first chapter would have opened with our trip to the Gators in 1973. A year out of high school we were going to watch with 3 of us in a new Vega (painted pearl white with flames) and two in a 57 ford fairlane yellow w/black trim and a 427 big block ford. Well after 100 miles the 57 had to stop for fuel imagine that. We are in Biloxi on Hwy 90 (I 10 was not finished at the time) leaving the gas station at about midnight the 57 broke the rear end. I suggested that we leave it at the station, jump into the vega (five people) and worry about it on the way home. Well the owner ,drinking heavily, would not hear of it so we left him and his friend in Biloxi. Eight hours later we arrived at the gators walking thru the rows of cars in the parking lot. Damn if we don't see the 57 a few rows ahead of us.
Hardly anything was said about it but I hope they pulled that driveshaft out of that car before the owner tried to put it in drive.

Greg
G Schenck is offline   Reply With Quote
Old 11-28-2020, 11:28 AM   #9
Dirk Olson
Member
 
Join Date: Mar 2003
Posts: 199
Likes: 50
Liked 172 Times in 46 Posts
Default Re: Never Be Afraid

I was15 years old and had a 64 chevy pickup decided to do a tune up so I put in the points set put the dwell meter on started up set the dwell ran great! but I wanted to put so neat wires and cap on (colored) pulled the wires and cap, reinstalled per the Motor Manual and it would not start, backfired and I am wondering what the hell I did wrong. looked at the book checked and rechecked still did not run. after a couple of very frustrating days i walked up the street to talk to a older guy that worked at one of the dealerships and the first thing he asked was where was number one/ I went HUUUU, WHAT? then he explain that someone may have have the distributor out and they wire it to work, meaning number one can be anywhere on the cap. My young brain had a hard time wrapping around that but he explained what I need to do. I went home found top dead center on number one, pulled the distributor reinstalled, wired per the Motor Manual, worked like a charm. Was a valuable lesson I have never forgot.
__________________
Dirk Olson 5036 STK
Dirk Olson is offline   Reply With Quote
Liked
Old 11-30-2020, 01:35 PM   #10
Henrys Toy
Member
 
Join Date: Oct 2020
Posts: 269
Likes: 3,723
Liked 520 Times in 176 Posts
Default Re: Never Be Afraid

Quote:
Originally Posted by Marty Knox View Post
Christmas Eve 1973 - pulling motor from my 55 Bel Air in my Mom's garage. The 2 x 4s broke, hit me on the way down and knocked me out.
I don't know how long I lay there.
Geez Marty , I wish I knew you then!
Henrys Toy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:01 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.