Header tether needed?

[JeremyDuncan]

Originally Posted by MAURICE BLENDHEIM

PITA ? bread ? or Politically Incorrect Technical Answer ?

It's an widely used acronym.

PITA= Pain in the ***

[terry1]

Not long after the "tether" rule came into effect, at a race in Epping, a guys "tether"
came off.There is even a video of that some where!
The next thing will be a "tether" to hold the "tether" on!!!
Then a "tether" to hold the "tether" to hold the "tether" ....................
Terry K

[Jim Caughlin]

Originally Posted by terry1

Not long after the "tether" rule came into effect, at a race in Epping, a guys "tether"
came off.There is even a video of that some where!
The next thing will be a "tether" to hold the "tether" on!!!
Then a "tether" to hold the "tether" to hold the "tether" ....................
Terry K

So explain the logic here, regardless of my experience (and welding skills), NHRA is OK with me building my entire chassis in my backyard but when it comes to header tethers I need to buy a $125 "NHRA certified' piece of cable and two hose clamps that I could have bought from Grainger for maybe $20? Seems risky to me, maybe they should have to be replaced every two years?

[gsa612]

How long has this "weld-on" tether been accepted?.I thought the reason for using the T-bolt clamp on the pri.pipe and collector was to prevent the old style tabs with 1/4" bolts and lock nuts from breaking off at the weld and the collector coming off.I know you still use the original tabs too, but how is this any better?...gsa612